Patriot Lighting 4-3/4" Integrated LED High Output Ultra-Thin Downlight Instruction Manual
Mohlala: RS3122
Selelekela
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Patriot Lighting 4-3/4" Integrated LED High Output Ultra-Thin Downlight, Model RS3122. Please read these instructions thoroughly before beginning installation and retain them for future reference.
Boitsebiso ba Bohlokoa ba Tšireletseho
- Kamehla tima motlakase ho sekhechana sa potoloho pele o kenya kapa o seta.
- Ikopanye le ramotlakase ea tšoanelehang haeba o sa tiisehe ka tšebetso ea ho kenya.
- Netefatsa hore likhokahano tsohle tsa motlakase li tsamaellana le likhoutu le melaoana ea lehae.
- Do not install in locations where the operating temperature exceeds the fixture's rating.
- This fixture is dimmable; ensure compatible dimmers are used (dimmer sold separately).
- Type IC rated: Suitable for direct contact with insulation.
Litaba tsa Sephutheloana
Netefatsa hore likarolo tsohle li teng pele u qala ho kenya.
- Integrated LED Downlight Fixture
- Lebokose la Remote Driver
- Buka ea litaelo (tokomane ena)
- Spare Part Package (includes wire nuts, screws, etc.)
Image: The integrated LED downlight fixture connected to its remote driver box.
Litaelo tsa ho Hloma
- Lokisa Sebaka sa ho Hloma: Turn off power at the circuit breaker. Locate the desired installation spot on the ceiling.
- Cut the Ceiling Hole: Using a hole saw, cut a circular opening in the ceiling. The recommended hole size for this 4-3/4" downlight is typically 4 inches, but refer to the product packaging or a template if provided for exact dimensions.
- Hokela Wiring: Open the remote driver box. Connect the house wiring (live, neutral, ground) to the corresponding wires inside the driver box using appropriate wire connectors (provided in the spare part package). Ensure all connections are secure.
- Khetha Mocheso oa 'Mala (CCT): Before closing the driver box, select your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K) using the switch located on the side of the remote driver box.
- Secure Driver Box: Close the remote driver box and place it into the ceiling cavity. The remote driver design eliminates the need for a separate housing.
- Install Downlight Fixture: Connect the downlight fixture to the remote driver cable. Push the spring clips on the sides of the downlight upwards and insert the fixture into the ceiling hole. Release the clips to secure the fixture flush against the ceiling.
- Khutlisa Matla: Bulela motlakase ho sekhechana sa potoloho.
Image: Diagram showing the dimensions of the downlight and remote driver, including the 4-3/4 inch diameter of the light.
Image: Close-up of the remote driver box showing the switch for selecting color temperature (CCT).
Image: The integrated LED downlight showing the spring clips used for installation.
Litaelo tsa Ts'ebetso
Once installed, the Patriot Lighting Integrated LED Downlight operates like any standard ceiling light fixture.
- Ho Bulela/Ho Koala: Use your wall switch to turn the light fixture on or off.
- Ho khanya: If a compatible dimmer switch (sold separately) is installed, you can adjust the light brightness by operating the dimmer control. This fixture is designed to be dimmable.
- Mocheso oa 'Mala: The color temperature (2700K, 3000K, 3500K, 4000K, or 5000K) is set during installation via a switch on the remote driver. This setting cannot be changed without accessing the driver box.
Image: Two installed downlights providing illumination in a modern kitchen setting.
Tlhokomelo
The Patriot Lighting Integrated LED Downlight requires minimal maintenance.
- Ho hloekisa: Netefatsa hore motlakase o timme pele o hlwekisa. Hlakola sesebediswa ka sesepa se bonolo, se omileng, kapa se nang le dae e nyane.amp lesela. O se ke wa sebedisa dihlwekisi tse kgohlang kapa dihlapolli, kaha di ka senya qetello kapa dikarolo tsa motlakase.
- Nako ea bophelo ea LED: The integrated LED is designed for long-term use and does not require bulb replacement.
- Tlhahlobo: Periodically inspect the fixture for any signs of damage or loose connections. If any issues are found, turn off power and consult a qualified electrician.
Ho batle phoso
| Bothata | Lebaka le ka khonehang | Tharollo |
|---|---|---|
| Leseli ha le khanye. | Ha ho na matla ho setsi. Khokahano ea wiring e hlephileng. Faulty switch. | Sheba sekhechana sa potoloho. Verify all wire connections are secure (ensure power is off first). Test the wall switch. |
| Leseli lea panya kapa le fifala ho sa lebelloa. | Sebopeho sa dimmer se sa lumellaneng. Wiring e hlephileng. Moqtagliphetoho. | Ensure a compatible LED dimmer is used. Check wiring connections (power off). Buisana le setsebi sa motlakase bakeng sa voltagmathata a. |
| Mocheso o fosahetseng oa 'mala. | Swichi ea CCT e setiloe ka phoso. | Turn off power. Access the remote driver box and adjust the CCT switch to the desired setting. |
Litlhaloso
| Sebopeho | Lintlha |
|---|---|
| Nomoro ea Mohlala | RS3122 |
| Brand | Patriot Lighting |
| Foromo ea ho Lokisa Leseli | Siling |
| Litekanyo tsa Sehlahisoa | 3.13"L x 5.13"W x 5.13"H |
| Boima ba Ntho | 10.9 lik'hilograma |
| Sehlahisoa sa Lumen | 1,150 lumens |
| Index ea ho Fana ka Mebala (CRI) | 90 |
| Mocheso oa Mobala (CCT) | Selectable: 2700K, 3000K, 3500K, 4000K, 5000K |
| Ho fifala | Yes (dimmer sold separately) |
| Mofuta oa ho Beha | Thaba ea Ceiling |
| Lintlha tsa IC | Type IC rated (suitable for direct contact with insulation) |
| UPC | 884656417838 |
Warranty le Tšehetso
For warranty information or technical support, please refer to the Patriot Lighting official websebaka kapa ikopanye le litšebeletso tsa bareki. Boloka rasiti ea hau ea theko bakeng sa likopo tsa tiisetso.
Moetsi: Patriot Lighting
Websebaka: Visit the Patriot Lighting Store on Amazon