Selelekela
This manual provides detailed instructions for the installation, operation, and maintenance of your Hama 00118498 Monitor Desk Mount. Designed to enhance your ergonomic workspace, this monitor arm allows for flexible positioning of your display, promoting a comfortable and productive environment. Please read these instructions carefully before beginning installation.
Litaelo tsa ho seta
Follow these steps to correctly install your Hama 00118498 Monitor Desk Mount.
1. Ho hokela Deske Clamp
- Beha deske clamp assembly onto the edge of your desk. Ensure the desk surface is sturdy and can support the weight of the mount and your monitor.
- Tiisa clamp screw firmly until the mount is securely fastened to the desk. Do not overtighten.
Image: The desk clamp mechanism, showing how it attaches to the desk edge for secure mounting.
2. Ho hokela Monitor
- Ensure your monitor is VESA compatible (100x100mm or 75x75mm).
- Carefully attach the VESA plate from the monitor arm to the back of your monitor using the provided screws. Make sure the screws are tightened securely.
- Slide the monitor (with the attached VESA plate) onto the arm's mounting head. Ensure it clicks into place or is secured with any locking mechanism provided.
Image: The monitor arm's VESA plate and adjustable joint, ready for monitor attachment.
Setšoantšo: Lehlakore view of the assembled monitor arm, highlighting the VESA mount and integrated cable management channels.
3. Tsamaiso ea Cable
Utilize the integrated cable management system to route your monitor cables neatly along the arm. This helps maintain a tidy workspace and prevents cable clutter.
Litaelo tsa Ts'ebetso
The Hama 00118498 Monitor Desk Mount offers various adjustment options for optimal viewmatšeliso.
- Phetoho ea Bophahamo: The integrated pneumatic spring allows for smooth and effortless vertical height adjustment. Gently push or pull the monitor to your desired height.
- Swivel: The arm can swivel horizontally, allowing you to rotate your monitor to share your screen or change your viewing angle.
- Shebisa: Adjust the monitor's tilt angle (up or down) to reduce glare and find the most comfortable viewing boemo.
- Ho potoloha: Rotate your monitor from landscape to portrait orientation as needed for different tasks.
Adjustments should be smooth. If the monitor does not hold its position, refer to the troubleshooting section for tension adjustments.
Tlhokomelo
Regular maintenance ensures the longevity and optimal performance of your monitor arm.
- Ho hloekisa: Wipe the surface of the monitor arm with a soft, damp lesela. Qoba ho sebelisa li-abrasive cleaners kapa solvents.
- Sheba Likhokahano: Hlahloba dikurufu le dikgokelo nako le nako ho netefatsa hore di dula di tiile ebile di tiile. Di tiise hape haeba ho hlokahala.
- Lubrication: The pneumatic spring is maintenance-free. Do not attempt to lubricate internal components.
Ho batle phoso
If you encounter issues with your Hama 00118498 Monitor Desk Mount, refer to the following common problems and solutions:
- Monitor Sags or Does Not Hold Position: The tension of the pneumatic spring may need adjustment. Locate the tension adjustment screw (usually found on the arm joint) and turn it clockwise to increase tension for heavier monitors, or counter-clockwise for lighter monitors. Adjust gradually until the monitor holds its position.
- Monitor is Difficult to Move: If the arm is too stiff, the tension may be too high. Turn the tension adjustment screw counter-clockwise to decrease tension.
- Arm Feels Loose on Desk: Netefatsa hore desk clamp is fully tightened. If the desk surface is too thin or fragile, consider adding a protective pad between the clamp and the desk.
- Monitor Wobbles: Check all mounting screws on the VESA plate and the arm joints to ensure they are securely fastened.
Litlhaloso
| Sebopeho | Lintlha |
|---|---|
| Nomoro ea Mohlala | 00118498 |
| Mofuta oa ho Beha | Lefapha Clamp |
| Mofuta oa Motsamao | Rotating, Swivel, Tilt, Height Adjustable (Pneumatic Spring) |
| Brand | Hama |
| Lintho tse bonahalang | Aluminium |
| Mmala | Ntsho |
| Lisebelisoa tse lumellanang | Hlokomela |
| Bonyane Bonyane Bo Lumellanang | 10 inch |
| Boholo bo lumellanang le boholo | 32 inch |
| Boima ba Ntho | 2.2 lik'hilograma |
| Naha ea tlhaho | China |
Warranty le Tšehetso
For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Hama website. You can typically find support contact details, FAQs, and additional resources there.
Official Hama Websebaka: www.hama.com