Selelekela
Thank you for choosing the Rolanstar 39-inch Computer Desk. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure safe and efficient use of your new desk. Please read this manual thoroughly before assembly and retain it for future reference.
Boitsebiso ba Tšireletseho
- Kamehla kopanya deske sebakeng se bonolo, se hloekileng ho thibela ho ngoatheha.
- Netefatsa hore dikurufu le difasteners tsohle di tiisitswe hantle pele o di sebedisa. Nako le nako hlahloba le ho di tiisa hape ha ho hlokahala.
- Do not overload the desk or drawers beyond their stated weight capacity.
- Keep liquids away from the integrated power outlet to prevent electrical hazards.
- Do not allow children to climb on or play with the desk.
- Use the desk on a level surface to prevent tipping. Adjustable feet are provided for stability on uneven floors.
Litaba tsa Sephutheloana
Pele o qala ho kopanya, ka kopo netefatsa hore likarolo tsohle tse thathamisitsoeng ka tlase li teng ebile ha lia senyeha.
- Computer Desk components (particle board panels, metal frame parts)
- Integrated Power Outlet (2 AC outlets, 2 USB ports)
- Hlokomela Stand
- 2 Lithako
- Accessory Bag (screws, bolts, L-shaped Allen wrench)
- Table Corner Protectors
- Lithae tsa Cable
- Buka ea Tataiso
- 4 Adjustable Feet Pads
Tlhophiso le Kopano
Assembly typically takes approximately 30 minutes with one person. Follow the numbered steps in the included instruction manual. Ensure all parts are correctly oriented before tightening screws.
Step 1: Assemble the Metal Frame
Connect the metal frame components using the provided screws and the L-shaped Allen wrench. Do not fully tighten screws until all parts are loosely assembled.
Setšoantšo: Ho felileview of the Rolanstar Computer Desk, showing the rustic brown wooden top and black metal frame.
Step 2: Attach the Desktop and Drawers
Secure the main desktop panel to the assembled metal frame. Install the drawer slides and then insert the two pull-out drawers. Ensure drawers slide smoothly.
Image: Close-up of the desk showing the two drawers open, highlighting their storage capacity for notebooks and paperwork.
Step 3: Install the Monitor Stand and Power Outlet
Attach the monitor stand to the designated area on the desktop. The integrated power outlet is pre-installed within the monitor stand. Route the power cord as needed.
Image: Detail of the monitor stand with the built-in power outlet, featuring two AC outlets and two USB ports.
Image: Diagram showing the overall dimensions of the desk and two possible installation modes for the monitor stand, allowing for different widths.
Mohato oa 4: Liphetoho tsa ho Qetela
Once all components are assembled, fully tighten all screws. Attach the adjustable feet pads to the bottom of the desk legs and adjust them to level the desk on uneven floors. Use the provided cable ties to manage power cords for a tidy workspace.
Image: Detail of an adjustable foot pad, demonstrating its function for leveling the desk.
Litaelo tsa Ts'ebetso
Using the Power Outlet
The desk features a built-in power strip with 2 standard AC outlets (120V/12A) and 2 USB ports (5V/2A). Plug the desk's main power cord into a wall outlet. You can then plug your devices directly into the integrated outlets for convenient power access.
Image: The desk's power cord, approximately 6.5 feet long, shown extending from the integrated power outlet on the monitor stand.
Utilizing the Monitor Stand
The monitor stand is designed to elevate your monitor, promoting an ergonomic sitting posture and reducing neck strain. It also provides additional storage space underneath for small items or a keyboard when not in use.
Image: An illustration demonstrating the ergonomic benefits of using the monitor stand to achieve a correct sitting posture.
Tšebeliso ea Drawer
The two pull-out drawers offer hidden storage for documents, office supplies, or personal items, helping to keep your desktop clear and organized.
Tlhokomelo
- Ho hloekisa: The desk surface is made of melamine veneer, which is waterproof and dust-free. Wipe clean with a damp lesela. Qoba lik'hemik'hale tse bohale kapa li-abrasive cleaners.
- Tlhahlobo: Nako le nako hlahloba li-screw le likhokahano ho netefatsa hore li lula li tiile. Tiisa hape ha ho hlokahala.
- Tshireletso: Use the provided table corner protectors to prevent damage to the desk and injuries.
Ho batle phoso
| Bothata | Lebaka le ka khonehang | Tharollo |
|---|---|---|
| Deske e thekesela haholo. | Uneven floor or loose fasteners. | Adjust the foot pads to level the desk. Check and tighten all assembly screws. |
| Litharoa ha li thelle hantle. | Improper installation of drawer slides or obstruction. | Ensure drawer slides are correctly aligned and installed. Check for any obstructions in the tracks. |
| Motlakase ha o sebetse. | Desk power cord not plugged in, or circuit breaker tripped. | Verify the desk's power cord is securely plugged into a functional wall outlet. Check your home's circuit breaker. |
Litlhaloso
| Sebopeho | Lintlha |
|---|---|
| Brand | Rolanstar |
| Nomoro ea Mohlala | CPT014-RR |
| Litekanyo tsa Sehlahisoa (D x W x H) | 19.7"D x 39.4"W x 34.2"H |
| Lintho tse bonahalang | Engineered Wood (Melamine finish), Metal Frame |
| Mmala | Rustic Brown |
| Palo ea Lithako | 2 |
| Sesebelisoa sa Matla | Li-socket tse 2 tsa AC (120V/12A), Likou tse 2 tsa USB (5V/2A) |
| Bolelele ba Khoele ea Matla | 6.5 Feet (approx.) |
| Likarolo Tse Khethehileng | Ergonomic Monitor Stand, Adjustable Feet, Cable Management |
| Assembly Time (Approx.) | 30 minutes (1 person) |
Warranty le Tšehetso
For warranty information, technical support, or to order replacement parts, please contact Rolanstar customer service through the retailer where the product was purchased or visit the official Rolanstar website. Please have your model number (CPT014-RR) and purchase date available when contacting support.
Rolanstar Official Store: Visit the Rolanstar Store on Amazon