1. Selelekela
Thank you for choosing the KUNPHY 350ml Ultrasonic Cleaner. This device utilizes high-frequency ultrasonic waves (46,000 Hz) to provide thorough and gentle cleaning for various items without causing damage. The ultrasonic vibrations, combined with a gentle water flow, effectively remove hidden dirt and grime from intricate surfaces. This manual provides essential information for the safe and efficient operation of your ultrasonic cleaner.
2. Litaelo tsa Tšireletso
- Bala litaelo tsohle pele u sebelisa sesebelisoa.
- Se ke oa qoelisa yuniti ea mantlha metsing kapa marong a mang.
- Netefatsa hore thapo ea motlakase ha e ea senyeha 'me e hoketsoe hantle sebakeng se theohileng.
- Boloka moo bana ba ka fihlang teng.
- Do not operate the cleaner without liquid in the tank.
- Hlakola sesebelisoa ha se sa sebelisoe le pele se hloekisa.
- Avoid cleaning scratched or cracked glasses/sunglasses, as ultrasonic cleaning may worsen existing damage.
- Do not disassemble or attempt to repair the unit yourself. Contact customer support for assistance.
3. Sehlahisoa Overview
3.1 Likaroloana
- Ultrasonic Cleaner Unit (with 304 stainless steel tank)
- Sekoahelo se Bonahalang
- Power Adapter (integrated or separate, depending on model)
- Watch Stand (included for specific items)
3.2 Likarolo
- Ho Hloekisa ka Katleho ea Ultrasonic: 46,000 Hz frequency for deep cleaning.
- Bokhoni bo Bohlale: 350ml stainless steel tank, suitable for various items.
- Ts'ebetso e bonolo: One-button ON/OFF control.
- Ho Koala ka Motlakase: Device automatically turns off after a cleaning cycle (typically 3 minutes).
- Kaho e Ts'oarellang: 304 stainless steel interior for corrosion resistance.
- Moralo o tsitsitseng: Non-slip silicone strip on the bottom for stability and noise reduction.
- Tšebeliso e fapaneng: Ideal for jewelry, watches, glasses, dentures, electric shaver heads, makeup brushes, combs, and more.
Image 1: KUNPHY 350ml Ultrasonic Cleaner showing its compact design and items it can clean.
Image 2: Versatility of the KUNPHY Ultrasonic Cleaner for various items including watches, dentures, and jewelry.
4. Seta
- Sebaka: Place the ultrasonic cleaner on a stable, flat, and dry surface. Ensure it is near a power outlet.
- Khokelo ea Matla: Hokela adaptara ea motlakase sebakeng se loketseng sa motlakase.
- Tlatsa Tanka: Open the lid and fill the stainless steel tank with tap water. Do not exceed the maximum fill line. For enhanced cleaning, a small amount of dish soap or a specialized ultrasonic cleaning solution can be added.
Image 3: Visual guide for filling the tank and placing items.
5. Litaelo tsa Ts'ebetso
- Lokisa Lintho: Ensure items to be cleaned are suitable for ultrasonic cleaning. For watches, use the included watch stand if applicable.
- Place Items: Carefully place the items into the water in the stainless steel tank. Ensure items are fully submerged but not overcrowded.
- Qala ho Hloekisa: Close the lid and press the ON/OFF button to start the cleaning cycle. The device will begin operating, and you may hear a gentle humming sound.
- Ho Koala ka Motlakase: The cleaner will automatically stop after approximately 3 minutes.
- Inspect and Repeat: After the cycle, open the lid and carefully remove the cleaned items. Rinse them under clean water and dry with a soft cloth. If items are still dirty, you may repeat the cleaning cycle.
- Hloekileng le Hloekileng: After use, unplug the device, empty the water from the tank, and wipe the tank and exterior clean.
Image 4: Demonstration of cleaning effectiveness on glasses.
Image 5: Demonstration of cleaning effectiveness on jewelry.
6. Tlhokomelo
- Ho hloekisa tanka: After each use, empty the water and wipe the stainless steel tank with a soft cloth. Do not use abrasive cleaners or harsh chemicals.
- Ho Hloekisa Ka Ntle: Senya bokantle ba yuniti ka papatsoamp cloth. Ensure no water enters the electronic components.
- Polokelo: Store the cleaner in a cool, dry place away from direct sunlight and moisture when not in use.
- E nyatsa: If mineral deposits build up in the tank, use a mild descaling solution or vinegar diluted with water, run a short cycle, then rinse thoroughly.
7. Ho rarolla mathata
| Bothata | Lebaka le ka khonehang | Tharollo |
|---|---|---|
| Yuniti ha e bulele. | Ha ho phepelo ea motlakase. | Check if the power cord is securely plugged into the unit and the wall outlet. Ensure the outlet is functional. |
| Ho hloekisa ha ho na katleho. | Insufficient water or cleaning solution; items too dirty; items overcrowded. | Ensure tank is filled to the appropriate level. Add a small amount of cleaning solution. Clean fewer items at a time. Run multiple cycles if necessary. |
| Lerata le sa tloaelehang nakong ea ts'ebetso. | Unit not on a flat surface; tank empty. | Place the unit on a stable, flat surface. Ensure the tank is filled with water. |
8. Litlhaloso
- Nomoro ea Mohlala: Mor-DE-UC-BCM-187
- Moetsi: SWX
- Bokhoni: 350ml
- Mokoloko oa Ultrasonic: 46,000 Hz
- Matla: 18 Watt-hora
- Boitsebiso: PTFE (Polytetrafluoroethylene), 304 Stainless Steel
- Mmala: Bosoeu
- Boholo ba Sephutheloana: 31 x 11.2 x 7.9 cm,
- Boima ba 'mele: 680 dikgerama
- Likarolo tse Kenyelelitsoeng: Ultrasonic cleaner unit, watch stand
- Libetri lia Hlokahala: Che
- Letsatsi la Pele la ho Fumana: La 15 Mmesa, 2022
9. Tšehetso ea Bareki
For any questions, concerns, or technical assistance regarding your KUNPHY Ultrasonic Cleaner, please contact our customer service. We aim to provide high-quality support to ensure your satisfaction.