Selelekela
This manual provides detailed instructions for the setup, operation, and maintenance of your BUFFBEE Glow Alarm Clock HRS-BLACK. Please read this manual thoroughly before using the product to ensure proper function and longevity.
Sehlahisoa se Felletseview
The BUFFBEE Glow Alarm Clock is a versatile device combining a digital alarm clock, FM radio, and a 7-color night light. It is designed to enhance your sleep and wake-up experience with customizable features.
Likarolo tsa Bohlokoa:
- 3-in-1 Tshebetso: Digital alarm clock, FM radio, and night light.
- Leseli la Bosiu la Mebala e 7: Adjustable with 5 brightness levels.
- Lialamo tse peli: Set two independent alarms with choice of FM radio, built-in beep, or bird sounds.
- Adjustable Display Dimmer: 0-100% brightness control for the time display.
- Likonopo tse Khantšitsoeng: For easy operation in low light conditions.
- Nako ea ho robala: Quick nap setting from 10 to 120 minutes.
- Auto-Off Sleep Timer: Automatically turns off night light and FM radio after a set duration.
- Sebaka sa ho tjhaja USB: For charging external electronic devices.
- Likhetho tsa Matla: AC powered with AAA battery backup (batteries not included).
Litaba tsa Sephutheloana:
- 1 x BUFFBEE Glow Alarm Clock
- 1 x Adapter ea Matla
- 1 x Buka ea Mosebelisi
Boitsebiso ba Karolo:
Refer to the image below for an overview of the alarm clock's buttons and display.
Setšoantšo: Pele view of the BUFFBEE Glow Alarm Clock, showing the digital time display, alarm indicators, and control buttons on the top panel. The top edge features a light strip.
Tlhophiso
1. Khokelo ea Matla:
- Connect the provided power adapter to the DC input port on the back of the alarm clock.
- Tšoaea adapta ka har'a lebota le tloaelehileng.
2. Battery Backup (Optional):
Bakeng sa ts'ebetso e sa sitisoeng nakong ea motlakase outages, install 3 AAA batteries (not included) into the battery compartment on the bottom of the unit. The clock will maintain time and alarm settings, and the alarm will still function, but the display and night light may be limited to conserve power.
Setšoantšo: Ka morao view of the alarm clock showing the power input and battery compartment, alongside a power adapter and three AAA batteries (not included).
3. Initial Time Setting:
- When first powered on, the display will show a default time.
- Tobetsa o hatelle NAKO SEBETSO button (usually located on the top panel) until the hour digits flash.
- Sebelisa le +/- buttons (or similar navigation buttons) to adjust the hour.
- Tobetsa NAKO SEBETSO again to confirm the hour and move to minute adjustment.
- Sebelisa le +/- likonopo ho lokisa metsotso.
- Tobetsa NAKO SEBETSO lekgetlo le leng hape ho netefatsa le ho tswa mokgweng wa ho seta nako.
- Ho fetola pakeng tsa sebopeho sa lihora tse 12 le lihora tse 24, tobetsa konopo 12/24H button (if available, often combined with time set or a dedicated button).
Litaelo tsa Ts'ebetso
1. Setting Alarms (Alarm 1 & Alarm 2):
The clock supports two independent alarms.
- Tobetsa ea ALARAMU 1 konopo (kapa ALARAMU 2) once to display the current alarm time.
- Tobetsa o hatelle ALARAMU 1 (kapa ALARAMU 2) button until the hour digits flash.
- Sebelisa le +/- likonopo ho fetola hora.
- Tobetsa ea TLHOKOMELO button again to confirm the hour and move to minute adjustment.
- Sebelisa le +/- likonopo ho lokisa metsotso.
- Tobetsa ea TLHOKOMELO button again to select the alarm sound: FM radio, built-in beep, or bird sounds. Use +/- ho potoloha likhethong.
- Tobetsa ea TLHOKOMELO button one more time to confirm and activate the alarm. An alarm icon will appear on the display.
- To turn off an active alarm, press the corresponding TLHOKOMELO button. The alarm icon will disappear.
2. Mosebetsi oa Snooze:
Ha alamo e lla, tobetsa konopo e kgolo TSOTSANG / LESELI button on top to temporarily silence the alarm for 9 minutes. The alarm will sound again after the snooze period.
3. Night Light Operation:
The alarm clock features a 7-color night light with adjustable brightness.
Image: The alarm clock shown with its top light strip illuminated in various colors, demonstrating the 7-color night light feature.
- Tobetsa ea KHANYA button (often combined with SNOOZE or a dedicated button) to turn the night light on/off.
- When the night light is on, press the KHANYA konopo ka makhetlo a mangata ho potoloha mebala e 7 e fumanehang.
- To adjust the brightness, use the +/- buttons while the night light is active. There are 5 brightness levels.
4. FM Radio:
The built-in FM radio allows you to listen to your favorite stations.
Image: The alarm clock display showing FM radio frequencies (FM108.5, FM97.5, FM87.5) and icons for radio volume and sleep timer.
- Tobetsa ea RELEBOHILE button to turn the FM radio on/off.
- Tobetsa ea SEKANANG button (or similar) to automatically scan and save available FM stations.
- Sebelisa le TLHOKOMELISO / E LATELANG buttons to navigate through saved stations or manually tune.
- Fetola molumo u sebelisa file ea BUKENG +/- buttons. The volume can be set from 0 to 16 levels.
5. Nap Timer:
The nap timer allows for quick, short sleep periods without affecting regular alarm settings.
- Tobetsa ea NAP button. The display will show the default nap time (e.g., 10 minutes).
- Tobetsa ea NAP button repeatedly to cycle through preset nap durations (e.g., 10, 20, 30, 60, 90, 120 minutes).
- The nap timer will start automatically after selection.
- To cancel the nap timer, press the NAP button until "OFF" is displayed.
6. Auto-Off Sleep Timer:
Set a timer for the night light and/or FM radio to automatically turn off after a specified duration.
- While the night light or FM radio is active, press the ROBALA NAKO konopo.
- Tobetsa ea ROBALA NAKO button repeatedly to cycle through available durations (e.g., 15, 30, 60, 90, 120 minutes, or OFF).
- The selected duration will be displayed, and the timer will begin. The night light and/or FM radio will turn off automatically when the timer expires.
7. Display Dimmer:
Adjust the brightness of the main time display from 0% to 100%.
Image: Six different views of the alarm clock display, illustrating the range of brightness from very dim to fully bright, and also showing the night light dimmer.
Sebelisa e khethehileng FIHLELANG daela kapa DIMMER +/- buttons (if available) to adjust the display brightness to your preference. This allows for comfortable viewho kganya boemong bofe kapa bofe.
8. Kou ea ho tjhaja ea USB:
A USB port is located on the back of the unit for charging small electronic devices.
Image: The alarm clock with a smartphone plugged into its side USB port, indicating the charging function.
Connect your device's USB charging cable to the port. The clock must be powered by the AC adapter for the USB charging function to work.
Tlhokomelo
To ensure the longevity and optimal performance of your BUFFBEE Glow Alarm Clock, follow these maintenance guidelines:
- Ho hloekisa: Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents as they may damage the surface.
- Matla: Always disconnect the power adapter from the wall outlet before cleaning or if the unit will be unused for an extended period.
- Tikoloho: Keep the alarm clock away from direct sunlight, heat sources, and excessive moisture.
- Phetoho ea Betri: If using battery backup, replace AAA batteries annually or when the battery indicator suggests low power. Ensure correct polarity when inserting new batteries.
Ho batle phoso
If you encounter issues with your BUFFBEE Glow Alarm Clock, refer to the following common problems and solutions:
| Bothata | Lebaka le ka khonehang | Tharollo |
|---|---|---|
| Clock display is blank or flickering. | No power or loose connection. Low battery backup. | Ensure the power adapter is securely plugged into the clock and the wall outlet. Check if AAA batteries are installed correctly and have sufficient charge. |
| Alamo ha e lle. | Alarm not activated. Alarm volume too low. | Verify that the alarm icon is displayed. Check the alarm volume setting. Ensure the correct alarm time is set. |
| Kamohelo ea seea-le-moea sa FM e fokola. | Weak signal. Antenna not extended. Interference. | Extend the FM antenna fully. Try repositioning the clock. Perform an auto-scan for stations again. |
| Leseli la bosiu ha le sebetse. | Tshebetso ya lebone e timilwe. | Press the LIGHT button to turn it on. Check if the brightness is set to 0%. |
| Ho tjhaja USB ha ho sebetse. | Clock not connected to AC power. Device not compatible. | Ensure the clock is powered by the AC adapter. Check if your device is compatible with standard USB charging. |
Litlhaloso
| Sebopeho | Lintlha |
|---|---|
| Brand | BUFFBEE |
| Nomoro ea Mohlala | HRS-BLACK |
| Litekanyo (L x W x H) | 12 x 3.81 x 6 cm (4.72 x 1.5 x 2.36 lisenthimithara) |
| Boima ba 'mele | 330 grams (0.73 lbs) |
| Kenyeletso ya Matla | AC 100-240V, 50/60Hz |
| Backup ea Battery | 3 x AAA libetri (ha li kenyelelitsoe) |
| Mofuta oa Pontšo | Dijithale |
| Hlahisa Khanya | 0-100% e ka fetoloa |
| Mebala ea Khanya ea Bosiu | 7 mebala |
| Khanya ea Leseli la Bosiu | Maemo a 5 a ka fetoha |
| Maqhubu a Radio ea FM | 87.5-108.0 MHz |
| Molumo oa Alamo | Maemo a 0-16 a ka fetoha |
| Likarolo Tse Khethehileng | Ambient light, Dual Alarm, Nap Timer, Sleep Timer, USB Charging Port |
Warranty le Tšehetso
BUFFBEE products are designed for reliability and performance. For specific warranty information, please refer to the documentation included with your purchase or contact BUFFBEE customer support.
If you require technical assistance or have questions regarding your BUFFBEE Glow Alarm Clock, please visit the official BUFFBEE website or contact their customer service department. Contact details are typically found on the product packaging or the manufacturer's websebaka.