Selelekela
The Perel EDIN305N is a 230V 16A 3600W DIN-rail mount digital weekly timer designed for indoor use. This device allows for precise, programmable control of electrical circuits, enabling automatic switching ON and OFF of connected appliances or lighting systems over a weekly cycle. It features a clear digital display and multiple programming options to suit various scheduling needs.
Litlhokomelo tsa Tšireletso
TLHOKOMELISO: Electrical installation should only be performed by a qualified electrician. Incorrect wiring can lead to electric shock, fire, or damage to the device and connected equipment. Always disconnect power at the main circuit breaker before installation or maintenance.
- Ensure the power supply matches the device's specifications (230V~50Hz).
- Do not exceed the maximum load capacity of 16A / 3600W.
- This device is designed for indoor use only. Avoid exposure to moisture, dust, or extreme temperatures.
- Se ke oa leka ho ipulela kapa ho lokisa sesebelisoa ka bouena. Fetisetsa litšebeletso tsohle ho basebetsi ba tšoanelehang.
- Boloka moo bana ba ka fihlang teng.
Sehlahisoa se Felletseview
The Perel EDIN305N digital timer consists of a main body with a digital display, control buttons, and terminal blocks for electrical connections. A transparent cover protects the display and buttons.
Setšoantšo sa 1: Pele view of the Perel EDIN305N Digital Weekly Timer. The image displays the LCD screen, control buttons (R, W+, H+, M+, C+, Clock, Manual, RES/RCL), and numbered terminal blocks (1, 2 at the top, 3, 4, 5 at the bottom).
Likonopo tsa ho Laola:
- R: Reset button (recessed).
- W+: Weekday setting.
- H+: Litlhophiso tsa hora.
- M+: Minute setting.
- C+: Clear program.
- Letšoao la oache: Used to set current time and day, and to exit programming mode.
- MANAKO: Manual override for ON/AUTO/OFF modes.
- RES/RCL: Reset/Recall program.
Libaka tsa Theminale:
- La 1, 2: Power supply input (N, L).
- 3, 4, 5: Output terminals for controlled circuit (Common, Normally Open, Normally Closed).
Litlhaloso tsa Tekheniki
| Paramethara | Boleng |
|---|---|
| Nomoro ea Mohlala | EDIN305N |
| Moqtage | 230V ~ 50Hz |
| Max. Hona joale | 16A |
| Max. Matla | 3600W |
| Nomoro ea Litlhophiso | 7 (ON/OFF programs) |
| Mofuta oa ho Beha | DIN-Terene |
| Litekanyo (L x W x H) | 2.36 x 3.54 x 1.57 inches (60 x 90 x 40 mm) |
| Boima ba 'mele | 0.12 kg (4.2 ounces) |
| Lintho tse bonahalang | Plastiki |
| Mmala | Bosoeu |
| Libetri li Hlokahala | No (internal battery for memory backup) |
Ho kenya
1. Ho phahamisa
The Perel EDIN305N is designed for DIN-rail mounting. Securely attach the timer to a standard 35mm DIN-rail within an electrical enclosure. Ensure sufficient space for wiring and ventilation.
2. Ho kenya mohala
BOHLOKOA: Ensure power is disconnected at the main circuit breaker before proceeding with wiring. Follow local electrical codes and regulations.
Setšoantšo sa 2: Lehlakore view of the Perel EDIN305N Digital Weekly Timer showing the electrical wiring diagram. It illustrates connections for Neutral (N), Live (L), and the output contacts (1, 2, 3, 4, 5) for controlling a load.
Refer to the wiring diagram (Figure 2) and the terminal block labels on the device:
- Connect the Neutral (N) wire of your 230V AC supply to terminal 1.
- Connect the Live (L) wire of your 230V AC supply to terminal 2.
- For the controlled circuit:
- Terminal 3: Common contact for the relay output.
- Terminal 4: Normally Open (NO) contact. The circuit connected here will be ON when the timer is active.
- Terminal 5: Normally Closed (NC) contact. The circuit connected here will be OFF when the timer is active.
- Connect the load (e.g., light, appliance) between the Live (L) supply and either terminal 4 (for NO operation) or terminal 5 (for NC operation), with terminal 3 connected to the Live (L) supply. Alternatively, connect the load between terminal 4 or 5 and the Neutral (N) supply, with terminal 3 connected to the Live (L) supply. Consult a qualified electrician for specific load wiring configurations.
Phetoho le ts'ebetso ea pele
1. Power On and Reset
After wiring and restoring power, the display will illuminate. If the display is blank or shows erratic characters, press the recessed R (Reset) button using a pointed non-metallic object (e.g., a pen tip). This will clear all settings and restore default values.
2. Setting Current Time and Day
- Tobetsa o hatelle Letšoao la oache konopo.
- Ha u ntse u tšoere Letšoao la oache konopo, tobetsa W+ to set the current day of the week (1=Monday, 7=Sunday).
- Ha u ntse u tšoere Letšoao la oache konopo, tobetsa H+ ho beha hora ea hona joale (0-23).
- Ha u ntse u tšoere Letšoao la oache konopo, tobetsa M+ ho beha motsotso wa hajwale (0-59).
- Lokolla Letšoao la oache button. The time and day are now set.
3. Programming ON/OFF Cycles
The timer supports up to 7 ON/OFF programs. Each program consists of an ON time and an OFF time.
- Tobetsa ea Letšoao la oache button once to enter programming mode. The display will show "1 ON".
- Tobetsa W+ to select the day(s) for this program. You can choose a single day, a block of days (e.g., Mon-Fri), or all days.
- Tobetsa H+ to set the ON hour for program 1.
- Tobetsa M+ to set the ON minute for program 1.
- Tobetsa ea Letšoao la oache button again. The display will show "1 OFF".
- Repeat steps 2-4 to set the OFF day(s), hour, and minute for program 1.
- To set additional programs (2-7), press the Letšoao la oache button to cycle through "2 ON", "2 OFF", etc., and repeat the setting process.
- Kamora ho seta mananeo ohle a lakatsehang, tobetsa konopo ea MOEKETSI konopo ea ho tsoa mokhoeng oa ho etsa mananeo le ho khutlela ponts'ong ea nako ea hajoale.
4. Phethahatso ka letsoho
Tobetsa ea MOEKETSI button repeatedly to cycle through the operating modes:
- BULELA: The output is continuously ON, overriding all programs.
- KETSAHALO: The timer operates according to the programmed ON/OFF cycles.
- TIMA: The output is continuously OFF, overriding all programs.
Ensure the timer is set to MOSEBETSI for programmed operation.
5. Clearing Programs
To clear a specific program:
- Enter programming mode by pressing the Letšoao la oache button until the desired program number (e.g., "3 ON") is displayed.
- Tobetsa ea C+ button. This will clear both the ON and OFF times for that specific program.
- Repeat for other programs as needed.
- Tobetsa MOEKETSI ho tsoa mokgweng wa ho etsa mananeo.
To clear all programs and reset the device, use the recessed R (Reset) button.
Tlhokomelo
- Hloekisa sesebelisoa ka lesela le bonolo, le omeletseng. Se ke oa sebelisa li-abrasive cleaners kapa solvents.
- Ensure the transparent cover is closed to protect the display and buttons from dust and splashes.
- Regularly check electrical connections for tightness, especially in high-vibration environments.
Ho batle phoso
| Bothata | Lebaka le ka khonehang | Tharollo |
|---|---|---|
| Pontšo ha e na letho. | No power supply; internal battery depleted. | Check power connections (terminals 1 & 2). Ensure main power is ON. If power is present, press the R (Reset) button. The internal battery recharges when connected to power. |
| Timer not switching ON/OFF as programmed. | Incorrect program settings; timer in manual ON/OFF mode. | Verify program settings (time, day, ON/OFF). Ensure the timer is in MOSEBETSI mode ka ho tobetsa konopo ea MOEKETSI konopo. |
| Connected appliance not receiving power. | Incorrect wiring; appliance fault; timer fault. | Check wiring according to Figure 2. Test the appliance directly. If wiring and appliance are fine, the timer may be faulty. |
| Buttons unresponsive or display erratic. | Software glitch; low internal battery. | Press the recessed R (Reset) button. Ensure the timer has been connected to power for at least 24 hours to fully charge the internal battery. |
Ho lahla
Do not dispose of this product with general household waste. This electronic device contains materials that can be recycled. Please dispose of it at a designated collection point for electrical and electronic equipment waste, in accordance with local regulations.
Warranty le Tšehetso
Perel products are manufactured to high quality standards. For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact your local Perel distributor or retailer. Please have your model number (EDIN305N) and purchase details ready when contacting support.