UNICOO Electric Height Adjustable Standing Desk

Selelekela

This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your UNICOO Electric Height Adjustable Standing Desk, Model KT1001. Please read this manual thoroughly before use to ensure safe and efficient operation.

Boitsebiso ba Tšireletseho

• Boloka moo bana ba ka fihlang teng.
• Do not touch the moving parts while the desk is in operation.
• To avoid accidents, ensure the desk is at least 2 degrees from horizontal when loading.
• Overheat protection will activate if the motor runs continuously for more than 2 minutes.
• Always unplug the desk when not in use or during cleaning.

Tlhophiso le Kopano

The UNICOO Electric Height Adjustable Standing Desk is designed for easy assembly, with most parts pre-assembled. Most users can complete installation in under 30 minutes. All necessary assembly tools are included.

Kopano e Fetaview:

1. Insert the motor bar into the column.
2. Attach the crossbar to the columns using the provided screws (M6*12). Ensure screws are loose initially to facilitate alignment.
3. Insert the drive rod into the column without the motor, ensuring the O-rings are fully inserted into the gearbox.
4. Connect the drive rod to the motor, ensuring the hexagonal rod is properly inserted. Tighten the plastic cap on both sides.
5. Mount the control box to the underside of the desktop using M4*12 screws.
6. Connect the control panel cable to the control box.
7. Secure the power cable and other wires using cable ties (ST4*16), being careful to avoid the transmission rod.

Litaelo tsa Ts'ebetso

The desk features an elegant 7-button programmable controller for easy height adjustment and memory settings.

Phetoho ea Bophahamo:

• Sebelisa le Up (^) le Down (v) arrow buttons to manually adjust the desk height. The current height is displayed on the LED screen.
• The desk can be adjusted between a minimum height of 30 inches and a maximum height of 48 inches.

Memori Presets:

The controller has four customizable presets (1, 2, 3, 4) to save your preferred sitting and standing heights.

1. Adjust the desk to your desired height using the Up/Down arrows.
2. Tobetsa ea 'S' button (Set).
3. Immediately press one of the number buttons (1, 2, 3, kapa 4) to save the current height to that preset.
4. To recall a saved height, simply press the corresponding number button. The desk will automatically move to the stored position.

Tlhokomelo

Tlhokomelo e tloaelehileng e netefatsa hore deske ea hau e tla tšoarella nako e telele le ts'ebetso e ntle ka ho fetisisa.

Ho hloekisa:

• The desktop is made of MDF with a scratch-resistant laminate finish. Wipe the surface with a soft, damp lesela. Qoba li-abrasive cleaners kapa lik'hemik'hale tse bohale.
• For the metal legs, use a mild cleaner and a soft cloth.

Tlhokomelo e akaretsang:

• Always unplug the desk from the power outlet when not in use or before performing any cleaning or maintenance.
• Ensure cables are neatly managed to prevent entanglement with moving parts.

Ho batle phoso

If you encounter any issues with your UNICOO standing desk, refer to the following common solutions:

Ho tsosolosa Desk:

• If the desk is not responding or displays an error code, press the Down (v) button to bring the table to its lowest height.
• Then, hold the Down (v) button for 5 seconds until the display shows 'RST' or a similar reset indicator. The desk will then reset to its lowest position.

Unlocking the Desk:

• If the desk is locked, press the 'S' konopo le Down (v) konopo ka nako e le 'ngoe bakeng sa metsotsoana e 5.

Tšireletso ea Mocheso o Feteletseng oa Motlakase:

• If the motor runs continuously for more than 2 minutes, the overheat protection will activate, and the desk will temporarily stop operating. Allow the motor to cool down for a few minutes before resuming use.

For persistent issues not covered here, please refer to the warranty and support section.

Litlhaloso

Warranty le Tšehetso

The UNICOO Electric Height Adjustable Standing Desk is covered by a 1-year limited warranty.

For warranty claims, technical support, or any questions regarding your product, please contact UNICOO customer service through the retailer's platform or the official UNICOO website. Please have your model number (KT1001) and purchase information ready when contacting support.