UNICOO Electric Height Adjustable Standing Desk KT1001 User Manual

1. Boitsebiso ba Bohlokoa ba Tšireletseho

Ka kopo bala litaelo tsohle ka hloko pele u kopanya le ho sebelisoa. Boloka bukana ena bakeng sa tšebeliso ea nako e tlang.

• This product includes safety features such as Collision Avoidance, Overheat Protection, and Auto Balance Protection.
• The desk is designed to support a maximum weight of 225 liponto. O se ke wa feta moedi ona.
• Ensure the desk is properly assembled and anchored for stability.
• Be aware of weight distribution and space requirements when operating the desk.
• Boloka bana le liphoofolo tse ruuoang lapeng hole le deske nakong ea opereishene ho thibela likotsi.
• Do not place hands or other objects near moving parts.

2. Likahare tsa Sephutheloana

Etsa bonnete ba hore likarolo tsohle li teng pele u qala kopano:

• Letlapa (1)
• Desk Frame (1)
• Enjene (1)
• Molaoli (1)
• Hardware Pack (screws, tools, etc.)

3. Litaelo tsa Kopano

Most parts of the UNICOO Electric Standing Desk are pre-assembled to facilitate quick setup. Assembly typically takes less than 30 minutes. It is recommended that batho ba babedi assemble the desk due to the weight of some components.

1. Unpack Components: Tlosa likarolo tsohle ka hloko ka har'a sephutheloana 'me u li behe sebakeng se hloekileng, se bonolo ho thibela mengoapo.
2. Kenya Maoto holim'a tafole: Align the desk legs with the pre-drilled holes on the underside of the tabletop. Insert and hand-tighten all screws initially. If any tabletop holes are slightly misaligned, loosen the pre-screwed leg supports to allow for adjustment, then tighten all screws securely once aligned.
3. Connect Drive Bar: Extend the drive bar by gently tugging on the end with the gasket. Carefully connect it to the motor side, ensuring a secure fit. Be patient and gentle during this step.
4. Kenya Controller: Mount the controller to the designated location on the underside of the tabletop using the provided screws.
5. Hokela Lithapo: Connect all necessary cables (motor to controller, power cable) according to the diagrams in the included assembly guide. Ensure all connections are firm.
6. Qetello ea ho Qetella: Once all components are in place and aligned, securely tighten all screws.

Image: The UNICOO Electric Height Adjustable Standing Desk with white top and white legs, showcasing its minimalist design and integrated control panel.

4. Litaelo tsa Ts'ebetso

The UNICOO Electric Standing Desk features an intuitive 7-button LED memory control panel for easy height adjustment.

Setšoantšo: Haufi view of the desk's control panel, featuring an LED display showing the current height and buttons for up, down, and four memory presets.

• Ho fetola Bophahamo: Sebelisa le Holimo (▲) le Tlase (▼) buttons on the control panel to manually raise or lower the desk to your desired height. The LED display will show the current height in inches.
• The powerful yet quiet motor allows for smooth transitions between sitting and standing positions.

5. Memory Presets and Reset

The control panel includes four customizable memory presets (1, 2, 3, 4) to store your preferred desk heights.

• Setting a Memory Preset:
  1. Adjust the desk to your desired height using the Up or Down buttons.
  2. Tobetsa ea S konopo.
  3. Immediately press the desired preset number button (1, 2, 3, kapa 4) to save the current height.
• Recalling a Memory Preset: Simply press the corresponding preset number button (1, 2, 3, kapa 4) to automatically adjust the desk to the saved height.
• Ho tsosolosa Desk: If the desk encounters an error or needs to be recalibrated:
  1. Tobetsa ea Tlase (▼) button to bring the table to its lowest height.
  2. Tsoela pele ho tšoara Tlase (▼) konopo bakeng sa 5 metsotsoana until the desk resets.
• Unlocking the Desk: If the desk becomes locked, press the S konopo le Tlase (▼) button simultaneously for 5 metsotsoana.

6. Tlhokomelo

Regular maintenance ensures the longevity and optimal performance of your UNICOO Electric Standing Desk.

• Ho hloekisa: Wipe the tabletop and frame with a soft, damp lesela. Qoba li-abrasive cleaners kapa lik'hemik'hale tse bohale tse ka senyang qetellong.
• Tsamaiso ea Cable: Periodically check and organize cables to prevent tangles and damage.
• Screw Tightness: Occasionally check all screws and fasteners to ensure they remain tight. Re-tighten if necessary.
• Motor and Mechanism: The motor and lifting mechanisms are designed for durability. Avoid obstructing the movement of the desk.

7. Ho rarolla mathata

If you encounter issues with your UNICOO Electric Standing Desk, refer to the following common solutions:

If these steps do not resolve the issue, please contact UNICOO customer support for further assistance.

8. Litlhaloso

Image: Diagram illustrating the dimensions of the UNICOO standing desk, including its 23.6-inch depth, 46.5-inch width, and adjustable height range from 30.5 to 48 inches.

9. Tiisetso le Tšehetso

Your UNICOO Electric Height Adjustable Standing Desk KT1001 is covered by a Waranti ea lilemo tse 2 for the frame, motor, and other mechanisms.

For warranty claims, technical support, or any questions not addressed in this manual, please contact UNICOO customer service. Refer to your purchase documentation for specific contact details or visit the official UNICOO websebaka.