1. Selelekela
Kea leboha ha u rekileasing the CUSTOM Drip-proof Stopwatch SW-709N. This manual provides detailed instructions for the proper use, setup, and maintenance of your stopwatch. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.

Setšoantšo sa 1: Pele view of the CUSTOM Drip-proof Stopwatch SW-709N. The display shows 23 hours, 59 minutes, and 59 seconds, with indicators for days of the week and "WATER RESISTANT" at the bottom. Buttons for SPLIT/RESET, LIGHT, MODE, and START/STOP are visible around the bezel.
The SW-709N is a digital stopwatch designed for various timing applications. It features an IPX4 drip-proof rating, a large LCD display, and an EL backlight for visibility in low-light conditions. It also includes date, time, alarm, and hourly chime functions.
2. Seta
2.1 Ho kenya Betri
The stopwatch operates on one CR-2032 coin battery. The battery included with the product is for testing purposes only and may have a limited lifespan. For regular use, it is recommended to replace it with a new battery.
- Fumana karolo ea betri ka morao ho stopwatch.
- U sebelisa sekurufetsi se senyenyane, bula sekoahelo sa karolo ea betri ka hloko.
- Insert one CR-2032 coin battery, ensuring the correct polarity (+/-) as indicated inside the compartment.
- Ka mokhoa o sireletsehileng koala sekoaelo sa kamore ea betri.
2.2 Nako ea Pele le Letsatsi la ho Beha
After battery installation, the stopwatch may require initial time and date setting. Refer to the "Operating Instructions" section for details on how to adjust these settings using the MODE and SPLIT/RESET buttons.
3. Litaelo tsa Ts'ebetso
3.1 Konopo Mesebetsi
- Konopo ea MODE: Cycles through display modes (Time, Stopwatch, Alarm). Used for setting adjustments.
- Qhala/Emisa Konopo: Starts and stops the stopwatch timer. Used to confirm settings.
- SPLIT/RESET Konopo: Records split times during stopwatch operation. Resets the stopwatch. Used to adjust values during setting.
- Konopo ea LIGHT: Activates the EL backlight for approximately 5 seconds.
3.2 Time and Date Display
The stopwatch can display the date (year, month, day) and time (hour, minute, second). The time display can be switched between 12-hour and 24-hour formats.
- Tobetsa ea MOKHOA button to navigate to the time display mode.
- Ho seta nako le letsatsi:
- In time display mode, press and hold the MOKHOA konopo ho fihlela pontsho e kganya.
- Sebelisa le SEBETSA / SETA BOPHELO konopo ho lokisa boleng bo benyang.
- Tobetsa ea QALA/EMA button to move to the next setting (e.g., seconds, minutes, hours, day, month, year, 12/24h format).
- Hang ha di-setting tsohle di phethetswe, tobetsa konopo ya MOKHOA konopo ea ho tsoa mokhoeng oa ho beha.
3.3 Mosebetsi oa Stopwatch
The stopwatch can measure time up to 23 hours, 59 minutes, and 59 seconds, with a minimum measurement of 1/100th of a second for the first 29 minutes, 59 seconds, and 99 hundredths.
- Tobetsa ea MOKHOA button to navigate to the stopwatch display mode.
- Tobetsa ea QALA/EMA konopo ho qala nako.
- To record a split time, press the SEBETSA / SETA BOPHELO button while the stopwatch is running. The split time will be displayed temporarily. Press SEBETSA / SETA BOPHELO hape ho kgutlela nakong ya tshebetso.
- Tobetsa ea QALA/EMA konopo ea ho emisa sebali.
- Tobetsa QALA/EMA hape ho qala nako hape.
- Ho seta botjha stopwatch ho zero, tobetsa konopo QALA/EMA button to stop the timer, then press the SEBETSA / SETA BOPHELO konopo.
3.4 Mosebetsi oa Alamo
The stopwatch includes an alarm function with a bell mark light and a buzzer that sounds for approximately 1 minute.
- Tobetsa ea MOKHOA button to navigate to the alarm setting mode.
- Ho seta nako ea alamo:
- In alarm mode, press and hold the MOKHOA konopo ho fihlela nako ea alamo e benya.
- Sebelisa le SEBETSA / SETA BOPHELO button to adjust the flashing value (hours, then minutes).
- Tobetsa ea QALA/EMA button to move between hour and minute settings.
- Tobetsa ea MOKHOA konopo ea ho tsoa mokhoeng oa ho beha.
- Ho kenya/ho tima alamo tshebetsong, tobetsa QALA/EMA button in alarm mode. An alarm icon will appear/disappear on the display.
3.5 Hourly Mosebetsi wa Chime
The hourly chime provides an audible alert at the top of every hour (00 minutes).
- Mokhoeng oa ho bonts'a nako, tobetsa MOKHOA button to cycle through modes until you reach the hourly chime setting (often indicated by a small icon).
- Tobetsa ea QALA/EMA konopo ea ho toggle hourly chime ON or OFF. An icon will indicate its status.
3.6 EL Backlight
To illuminate the display in dark environments, press the KHANYA button. The backlight will remain active for approximately 5 seconds.
4. Likarolo
- IPX4 Drip-proof Rating: This stopwatch is designed to withstand splashes of water from any direction, making it suitable for use in rainy weather or locations where water splashes are common. It is not intended for submersion.
- Pontšo e kholo ea LCD: Provides clear and easy-to-read numerical information.
- EL Backlight: Ensures visibility of the display in low-light conditions.
- Pontšo ea Letsatsi le Nako: Shows year, month, day, hour, minute, and second, with selectable 12/24-hour format.
- Alamo le Hourly Khimo: Integrated functions for time management.
5. Tlhokomelo
5.1 Ho hloekisa
Hlakola oache ea ho emisa ka lesela le bonolo, le omileng. Bakeng sa litšila tse thata, e nyenyane hanyaneamp cloth can be used, followed by a dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the casing kapa pontsho.
5.2 Phetoho ea Betri
When the display becomes dim or functions become erratic, it is time to replace the battery. Follow the instructions in Section 2.1. Dispose of used batteries according to local regulations.
5.3 Polokelo
Store the stopwatch in a cool, dry place away from direct sunlight, extreme temperatures, and strong magnetic fields. If storing for an extended period, it is advisable to remove the battery to prevent leakage.
6. Ho rarolla mathata
| Bothata | Lebaka le ka khonehang | Tharollo |
|---|---|---|
| Pontšo ha e na letho kapa e lerootho. | Betri e tlase kapa e shoeleng. | Replace the CR-2032 battery (refer to Section 2.1). |
| Likonopo ha li arabele. | Phoso ea nakoana ea software kapa betri e tlase. | Remove and reinsert the battery. If the issue persists, replace the battery. |
| Nako/Letsatsi ha le a nepahala. | Not set correctly or battery was removed. | Reset the time and date (refer to Section 3.2). |
| Stopwatch does not start/stop. | Ho khethiloe mokhoa o fosahetseng. | Ensure the stopwatch is in stopwatch mode (refer to Section 3.3). |
If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact CUSTOM customer support.
7. Litlhaloso
- Mohlala: SW-709N
- Lebitso: TUMELO
- Tšimoloho: China
- Max Timing Capacity: Lihora tse 23, metsotso e 59, metsotsoana e 59
- Min Timing Resolution: 1/100 second (for first 29 minutes, 59 seconds, 99 hundredths)
- Mesebetsi: Stopwatch (Split), Time, Date, Alarm, Hourly Khimo
- Hlahisa: Digital (Month, Day, Day of Week, Hour, Minute, Second)
- Ho nepahala ha nako: ±1 second/day
- Alarm Features: Bell mark light, buzzer (approx. 1 minute duration)
- Hourly Khimo: Sounds at 00 minutes of every hour
- Lebone le ka morao: EL backlight (approx. 5 seconds illumination)
- Boholo: Approx. W 66.5 × H 77 × D 11 mm
- Boima ba 'mele: Hoo e ka bang. 60 g
- Mohloli oa Matla: 1 x CR-2032 Coin Battery
- Mathata a Metsi: IPX4 Drip-proof (resistant to splashing water)
- Lisebelisoa: Buka ea Tataiso
8. Tiisetso le Tšehetso
Specific warranty details and customer support contact information are not provided in the product data. Please refer to the product packaging or the official CUSTOM website for warranty terms and support contacts.
For general inquiries or technical assistance, please visit the manufacturer's website or contact your local retailer.