Selelekela
Thank you for choosing the PowerPac 12-Inch Table Fan, model PPTF303. This manual provides comprehensive instructions for the safe and efficient use of your new fan. Please read all instructions carefully before operating the appliance and retain this manual for future reference.
Litaelo tsa Bohlokoa tsa Tšireletso
Ho fokotsa kotsi ea mollo, ho tsosoa ke motlakase, kapa ho tsoa kotsi, kamehla latela mehato ena ea motheo ea tšireletso:
- Bala litaelo tsohle pele u sebelisa fan ena.
- Etsa bonnete ba hore motlakase o na le voltage tsamaisana le leiboleng la lintlha ho fene.
- Kamehla ntsha fene ka har'a sokete ea motlakase pele u e hloekisa, u e lokisa kapa u e tsamaisa.
- Do not insert fingers or any objects through the grille when the fan is operating.
- Keep the fan away from water or other liquids. Do not operate in wet conditions.
- Do not operate the fan with a damaged cord or plug. If the cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
- Sesebelisoa sena ha sea rereloa ho sebelisoa ke batho (ho kenyeletsoa bana) ba nang le matla a fokotsehileng a 'mele, kutlo kapa kelello, kapa ba hlokang boiphihlelo le tsebo, ntle le haeba ba filoe tlhokomelo kapa taelo mabapi le tšebeliso ea sesebelisoa ke motho ea ikarabellang bakeng sa polokeho ea bona.
- Bana ba lokela ho behoa leihlo ho netefatsa hore ha ba bapale ka sesebelisoa.
- O se ke wa sebedisa fene haufi le dikgaretene, dimela, kapa dintho tse ding tse ka hulwang ka hara mahare a fene.
- Place the fan on a stable, flat surface to prevent it from tipping over.
- The fan is equipped with built-in thermal protection against overheating. If the fan overheats, it will automatically shut off. Unplug the fan and allow it to cool down before restarting.
Sehlahisoa se Felletseview
Likaroloana
The PowerPac 12-Inch Table Fan PPTF303 includes the main fan unit with its base, grille, blades, motor housing, control panel, and power cord.
Setšoantšo sa 1: Pele view of the PowerPac 12-Inch Table Fan PPTF303.
Likaroloana
- 3 Litlhophiso tsa Lebelo: Choose from low, medium, or high airflow.
- Built-in Thermal Protection: E koala ka bo eona ho thibela mocheso o feteletseng.
- High Velocity Motor: Designed for maximum air circulation.
- Ho khaotsa: Provides wide-area cooling.
- Mosebetsi oa Sebali: Allows for timed operation.
Tlhophiso
The PowerPac 12-Inch Table Fan PPTF303 typically comes pre-assembled. Follow these steps for initial setup:
- Hlakola: Carefully remove the fan from its packaging. Retain packaging for storage or return if necessary.
- Sebaka: Place the fan on a firm, level surface where it will not be easily knocked over. Ensure there is adequate space around the fan for proper air circulation and oscillation.
- Khokelo ea Matla: Insert the power plug into a suitable electrical outlet. Ensure the outlet voltage lumellana le litlhoko tsa molateli.
Litaelo tsa Ts'ebetso
Your PowerPac Table Fan features a touch control method for easy operation.
Figure 2: Close-up of the control panel with speed and timer settings.
- Tlosa/Tima: Press the '0' button to turn the fan off. To turn it on, select a speed setting (1, 2, or 3).
- Fetola Lebelo la Fans:
- Press '1' for Low speed.
- Press '2' for Medium speed.
- Press '3' for High speed.
- Ho khaotsa: To activate the oscillation feature, press the button located on the top of the motor housing. Press it again to stop oscillation.
- Mosebetsi oa Sebali: The fan includes a timer dial, typically marked from 0 to 60 minutes. Turn the dial clockwise to set the desired operating time. The fan will automatically switch off once the set time has elapsed.
Tlhokomelo
Tlhokomelo ea kamehla e netefatsa ts'ebetso e nepahetseng le bophelo bo bolelele ba fan ea hau.
- Ho hloekisa:
- Kamehla u tlose fene pele u hloekisa.
- Sebelisa bonolo, damp lesela ho hlakola bokaholimo ba kantle. U se ke ua sebelisa litlhoekiso tse khorofo kapa li-solvent.
- To clean the fan blades, carefully remove the front grille (refer to specific instructions if provided with your model for grille removal). Wipe the blades with a damp cloth. Ensure all parts are dry before reassembling and operating.
- Polokelo: When not in use for extended periods, store the fan in its original packaging or a clean, dry place.
Ho batle phoso
Haeba o kopana le mathata afe kapa afe ka motšehetsi oa hau, ka kopo sheba mathata le litharollo tse latelang tse tloaelehileng:
| Bothata | Lebaka le ka khonehang | Tharollo |
|---|---|---|
| Fane ha e bulele. | No power supply; fan unplugged; thermal protection activated. | Check power cord connection; ensure outlet is functional; unplug and allow fan to cool for 30 minutes before restarting. |
| Moea o fokolang. | Fan speed set too low; dirty blades/grille. | Increase fan speed; clean blades and grilles as per maintenance instructions. |
| Fene e etsa lerata le sa tloaelehang. | Loose parts; obstruction in blades. | Unplug and check for any loose parts or obstructions. If noise persists, contact customer support. |
If the problem persists after attempting these solutions, please contact PowerPac customer support.
Litlhaloso
Key technical specifications for the PowerPac 12-Inch Table Fan PPTF303:
| Tlhaloso | Lintlha |
|---|---|
| Brand | PowerPac |
| Lebitso la Mohlala | PPTF303 |
| Moqapi oa Fane ea Motlakase | Tafole Fan |
| Boholo | 12 lisenthimithara |
| Palo ea Mabelo | 3 |
| Mohloli oa Matla | Motlakase oa Corded |
| Wattage | 70 watts |
| Mokhoa oa ho Laola | Thetsa |
| Likarolo Tse Khethehileng | Timer, Oscillation, Thermal Protection |
| Lintho tse bonahalang | Plastiki |
| Naha ea tlhaho | China |
Figure 3: Approximate dimensions of the PowerPac 12-Inch Table Fan PPTF303.
Warranty le Tšehetso
The PowerPac 12-Inch Table Fan PPTF303 comes with a Tiisetso ea Moetsi oa Lehae (Singapore) ea Selemo se le 1. Ka kopo, boloka bopaki ba theko ea hau bakeng sa likopo tsa waranti.
For technical support, service, or warranty inquiries, please contact PowerPac customer service through their official websebaka kapa morekisi moo sehlahiswa se rekiloeng teng.