1. Selelekela
Thank you for choosing the ANSMANN Powerline 4 Smart battery charger. This intelligent charger is designed to safely and efficiently recharge your NiMH AA (Mignon HR6) and AAA (Micro HR03) rechargeable batteries. Please read this manual carefully before first use to ensure proper operation and to maximize the lifespan of your batteries and charger.
2. Boitsebiso ba Tšireletseho
- Use this charger only for NiMH AA and AAA rechargeable batteries. Do not attempt to charge other battery types (e.g., alkaline, lithium) as this may cause explosion, leakage, or personal injury.
- Se ke oa beha tjhaja sebakeng sa pula, mongobo, kapa mocheso o feteletseng.
- Ensure proper polarity when inserting batteries. The charger features reverse polarity protection.
- Do not disassemble or modify the charger. Refer all servicing to qualified personnel.
- Tlosa tjhaja ho tsoa sehokelong sa motlakase ha e sa sebelisoe kapa pele e hloekisoa.
- The charger incorporates an automatic shutdown (-dU) and an 8-hour safety timer to prevent overcharging.
- Boloka moo bana ba ka fihlang teng.
For detailed safety information, please refer to the safety document provided with your product.
3. Sehlahisoa Overview
3.1 Likarolo tsa Bohlokoa
- Intelligent charging: Automatically and individually charges 1 to 4 NiMH AA/AAA batteries.
- Automatic charge termination: Stops charging when batteries reach 100% capacity.
- Trickle charge: Maintains full charge once batteries are charged.
- Defective battery detection: Identifies and signals faulty rechargeable batteries.
- Accu Repair mode: Revives deeply discharged or 'tired' rechargeable batteries.
- Safety features: Reverse polarity protection, -dU automatic shutdown, 8-hour safety timer.
3.2 Likahare tsa Sephutheloana
- 1x ANSMANN Powerline 4 Smart Battery Charger with integrated power supply (100-240V)
- 1x Buka ea Mosebelisi
Likarolo tsa 3.3 tsa Sehlahisoa
The charger features four individual charging slots for AA or AAA batteries and LED indicators above each slot to show the charging status.
4. Seta
4.1 Ho hokela tjhaja
- Ensure the charger is clean and dry before connecting to power.
- Plug the integrated power plug of the ANSMANN Powerline 4 Smart charger directly into a standard wall power outlet (100-240V AC).
4.2 Ho kenya Libetri
- Open the battery compartment if applicable, or simply slide batteries into the slots.
- Insert 1 to 4 NiMH AA (Mignon HR6) or AAA (Micro HR03) rechargeable batteries into the charging slots.
- Ensure correct polarity (+ and -) by matching the battery terminals with the markings on the charger slots. The charger has reverse polarity protection.
5. Litaelo tsa Ts'ebetso
5.1 Mokhoa oa ho tjhaja
Once batteries are correctly inserted and the charger is plugged in, the charging process begins automatically for each individual battery. The LED indicator above each slot will show the charging status:
- Flashing e Tala: Pre-charge mode (initial phase of charging).
- Khubelu: Fast charge mode (main charging phase).
- Botala: Ready / Trickle charge mode (battery is fully charged and maintained).
- Red Flashing: Defective battery detected.
The charging time for a 1000 mAh battery is approximately 2 hours and 30 minutes. For a 2500 mAh battery, it is approximately 6 hours.
5.2 Accu Repair Mode
The Powerline 4 Smart features an 'Accu Repair' function. This mode attempts to reactivate deeply discharged or 'tired' NiMH batteries, potentially extending their usable life. This process is automatic and integrated into the charging cycle.
5.3 Defective Battery Detection
The charger automatically detects defective batteries. If a faulty battery is inserted, the corresponding LED indicator will flash red, and the charging process for that specific slot will not proceed. Remove and dispose of defective batteries according to local regulations.
6. Tlhokomelo
6.1 Ho hloekisa
- Kamehla ntsha tjhaja sehokelong sa motlakase pele o hlwekisa.
- Use a dry, soft cloth to wipe the exterior of the charger.
- Do not use liquid cleaners, solvents, or abrasive materials.
- Ensure no dust or debris accumulates in the charging slots.
6.2 Polokelo
- Boloka tjhaja sebakeng se phodileng, se omileng hole le letsatsi le mocheso o feteletseng.
- When not in use for extended periods, unplug the charger.
7. Ho rarolla mathata
| Bothata | Lebaka le ka khonehang | Tharollo |
|---|---|---|
| Charger not starting / No LED activity | No power supply; Charger not properly plugged in. | Check power outlet; Ensure charger is securely plugged in. |
| LED e benyang e khubelu | Defective battery detected. | Remove the battery. If it continues to flash red with other batteries, the charger may be faulty. |
| Betri ha e tjhaje ka botlalo | Battery is old or damaged; Incorrect battery type. | Try the 'Accu Repair' function (automatic). Replace old batteries. Ensure only NiMH AA/AAA batteries are used. |
| Tjhajara e ikutloa e futhumetse nakong ea ts'ebetso | Normal during charging. | This is normal. If it becomes excessively hot or emits smoke/odor, unplug immediately and contact support. |
8. Litlhaloso
| Sebopeho | Tlhaloso |
|---|---|
| Brand | Ansmann |
| Nomoro ea Mohlala | 1001-0049 |
| Mefuta ea Battery e lumellanang | NiMH AA/Mignon/HR6 and AAA/Micro/HR03 |
| Palo ea li-slots tsa ho tjhaja | 4 |
| Keletso Voltage | 100-240 Volts (AC) |
| Khumo Voltage | 5 Volts (DC) |
| Matla a Hona Joale | 500 mA |
| Typical Charging Time (1000 mAh) | Lihora tse 2.5 |
| Product Dimensions (P x L x H) | 67P x 12l x 77H millimeters (Note: The provided dimensions 67P x 12l x 77H mm seem inconsistent with the image 119mm H x 67mm W x 36mm D. Using image dimensions for clarity.) |
| Litekanyo tsa Sehlahisoa (Bophahamo x Bophara x Botebo) | 119 mm x 67 mm x 36 mm |
| Mmala | Ntsho |
| Melao ea Tšireletso | TÜV e netefalitsoeng |
| Naha ea tlhaho | China |
9. Tiisetso le Tšehetso
9.1 Boitsebiso ba Tiisetso
The ANSMANN Powerline 4 Smart charger comes with a 3-year warranty. Please retain your proof of purchase for warranty claims. Spare parts availability in the EU is also 3 years.
9.2 Tšehetso ea Bareki
For any questions, technical assistance, or warranty claims, please contact ANSMANN customer support through their official website or the retailer where you purchased the product. Do not attempt to repair the device yourself.