1. Sehlahisoa Overview
The Einhell TC-TC 800 Tile Cutter is designed for precise and efficient cutting of wall and floor tiles. This robust tool is suitable for various home renovation projects, offering clean cuts with minimal dust thanks to its water cooling system.
Likarolo tsa Bohlokoa:
- Robust Stainless Steel Table: Measuring 395 x 385 mm, it is easy to clean and features an angular scale up to 45° with non-slip feet for stable operation.
- Precise Cutting Guide: Ensures exact and straight cuts. The angle stop is adjustable from -45° to +45° for miter cuts.
- Integrated Water Reservoir: Provides necessary water cooling for the saw blade, protecting it from heat damage.
- Bokhoni ba ho Seha: Maximum cutting height of 14 mm at 45° and 34 mm at 90°.
- Molebeli oa Tšireletso: A protective guard for the cutting disc ensures user safety from chips and dust.
2. Litaelo tsa Tšireletso
Kamehla bala le ho utloisisa litemoso tsohle tsa polokeho, litaelo, lipapiso, le lintlha tse fanoeng ka sesebelisoa sena sa matla. Ho hloleha ho latela litaelo tsohle tse thathamisitsoeng ka tlase ho ka baka ts'okelo ea motlakase, mollo, le/kapa kotsi e mpe.
Litlhokomeliso tse Akaretsang tsa Polokeho:
- Apara lisebelisoa tse loketseng tsa tšireletso ea botho (PPE) ho kenyeletsoa likhalase tsa tšireletso, tšireletso ea kutlo le liatlana.
- Netefatsa hore sebaka seo ho sebetsoang ho sona se hloekile, se khantšitsoe hantle, 'me ha se na litšitiso.
- Boloka bana le batho ba ka thōko ha u ntse u sebelisa sesebelisoa.
- Never operate the tool if the power cord or plug is damaged.
- Always disconnect the power supply before making any adjustments, changing accessories, or performing maintenance.
- Sebelisa lehare le nepahetseng bakeng sa thepa e sehiloeng.
- Ensure the water reservoir is adequately filled before operation to prevent overheating of the blade.
3. Likarolo Tse Feletsengview
Familiarize yourself with the main components of your Einhell TC-TC 800 Tile Cutter:
- Cutting Table (Stainless Steel)
- Diamond Cutting Disc (180 mm diameter)
- Setsi sa Likoloi
- Letamo la Metsi
- Cutting Guide with Scale
- Angle Stop (-45° to +45°)
- Lehare la molebeli
- On/Off Switch
- Ho jara Handle
Setšoantšo sa 1: Ho fetaview of the Einhell TC-TC 800 Tile Cutter with its main parts.
4. Seta
Before operating the tile cutter, ensure proper setup for safety and optimal performance.
4.1 Ho phutholla le ho hlahloba
- Tlosa ka hloko likarolo tsohle tsa sephutheloana.
- Inspect the tool for any signs of damage during transit. Do not operate if damaged.
- Etsa bonnete ba hore likarolo tsohle tse thathamisitsoeng li teng.
4.2 Ho Tlatsa Tanka ea Metsi
The integrated water reservoir is essential for cooling the diamond cutting disc and reducing dust.
- Locate the water reservoir beneath the cutting table.
- Fill the reservoir with clean water to the indicated level. Ensure the water pump is submerged.
- Regularly check the water level during operation and refill as needed.
Figure 2: Filling the water reservoir for wet cutting.
4.3 Adjusting the Cutting Guide and Angle Stop
For accurate cuts, adjust the cutting guide and angle stop as required.
- The cutting guide with scale ensures straight cuts. Position it according to your desired measurement.
- For miter cuts, adjust the angle stop between -45° and +45°. Secure it firmly before cutting.
Figure 3: Adjustable angle stop for miter cuts.
5. Litaelo tsa Ts'ebetso
Follow these steps for safe and effective tile cutting.
5.1 Ho Matlafatsa/Ho tima
- Connect the tile cutter to a suitable power outlet (240 Volts).
- To turn on, press the green 'ON' button.
- To turn off, press the red 'OFF' button.
Figure 4: Power switch for turning the machine on and off.
5.2 Ho Seha
- Place the tile firmly on the stainless steel cutting table, aligning it with the cutting guide or angle stop as desired.
- Ensure the water pump is active and water is flowing to the blade.
- Turn on the tile cutter.
- Slowly and steadily push the tile through the rotating diamond blade. Avoid excessive force.
- Once the cut is complete, turn off the tile cutter and wait for the blade to stop before removing the tile.
Figure 5: Demonstrating a tile being cut with the machine.
5.3 Official Product Video: How to Use
Video 1: This video demonstrates the basic operation and usage of a tile cutter, including setup and cutting techniques.
6. Tlhokomelo
Regular maintenance ensures the longevity and performance of your tile cutter.
6.1 Cleaning the Water Reservoir
After each use, clean the water reservoir to prevent buildup of tile dust and debris.
- Hakolla phepelo ea motlakase.
- Remove the cutting table or access panel to reach the reservoir.
- Empty the dirty water and thoroughly clean the reservoir with fresh water.
- Kopanya likarolo hape.
6.2 Phetoho ea Lehare
Replace the diamond cutting disc when it becomes dull or damaged.
- Netefatsa hore sesebelisoa ha se hokahantsoe.
- Use the provided tool to loosen the blade retaining nut.
- Carefully remove the old blade and install the new 180 mm diamond cutting disc, ensuring it is correctly oriented.
- Tighten the retaining nut securely.
7. Ho rarolla mathata
This section addresses common issues you might encounter with your tile cutter.
| Bothata | Lebaka le ka khonehang | Tharollo |
|---|---|---|
| Poor cut quality (chipping, uneven edges) | Dull or incorrect blade; insufficient water cooling; pushing too fast. | Replace blade with a suitable diamond disc; ensure water reservoir is full and pump is working; reduce feeding speed. |
| Water overflow from table | Water channels blocked; reservoir too full; uneven surface. | Clean water channels; do not overfill reservoir; ensure the machine is on a level surface. |
| Mochine ha o qale | No power supply; faulty switch; motor issue. | Check power connection and circuit breaker; test the power outlet; contact customer support if switch or motor is faulty. |
| Rusted screws/components | Lack of proper drying/maintenance after wet use. | Regularly clean and dry all metal components after use. Apply a rust preventative lubricant (e.g., WD-40) to screws and moving parts. |
8. Litlhaloso
| Sebopeho | Lintlha |
|---|---|
| Brand | Einhell |
| Nomoro ea Mohlala | 4301185 |
| Matla | 800 Watts |
| Moqtage | Li-volts tse 240 |
| Lebelo | 2950 RPM |
| Diamond Cutting Disc Diameter | 180 limilimithara |
| Max. Cutting Height (90°) | 34 limilimithara |
| Max. Cutting Height (45°) | 14 limilimithara |
| Angle of Cut | 45 likhato |
| Table Dimensions (L x W) | 39.6cm x 38.5cm |
| Litekanyo tsa Sehlahisoa (L x W x H) | 39.6l. x 38.5an. x 25.5al. centimeters |
| Boima ba Sehlahisoa | 9.1 lik'hilograma |
| Mohloli oa Matla | Motlakase o nang le mohala |
| Likarolo Tse Khethehileng | Adjustable angle stop, parallel stop with scale |
9. Tiisetso le Tšehetso
9.1 Boitsebiso ba Tiisetso
This Einhell product comes with a Tiisetso e lekantsoeng ea selemo se le seng. Ka kopo, boloka bopaki ba theko bakeng sa likopo life kapa life tsa waranti.
9.2 Tšehetso ea Bareki
For technical assistance, spare parts, or warranty inquiries, please contact Einhell customer service. Refer to the official Einhell websaete kapa sephutheloana sa sehlahisoa sa hau bakeng sa tlhaiso-leseling ea morao-rao ea puisano.