Globo Lighting AMUR 49350-52H Linear Suspension LED Light Instruction Manual

1. Selelekela

Kea leboha ha u rekileasing the Globo Lighting AMUR Linear Suspension LED Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before beginning installation and retain them for future reference.

Setšoantšo sa 1.1: Pele view of the Globo Lighting AMUR Linear Suspension LED Light, showcasing its chrome metal finish and five crystal-encased LED light sources.

2. Litaelo tsa Tšireletso

TLHOKOMELISO: To avoid electric shock, always disconnect power at the main circuit breaker or fuse box before installation or servicing. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.

• Bala litaelo tsohle ka hloko pele u kenya.
• Ensure the electrical supply is turned off before handling the fixture.
• Ikopanye le ramotlakase ea tšoanelehang haeba o sa tiisehe ka tšebetso ea ho kenya.
• Se ke oa feta vol e boletsoengtage (230 Volts) or wattage (48 watts).
• Handle the fixture with care to prevent damage to the components, especially the crystal elements.
• Boloka lisebelisoa tsa ho paka hole le bana.

3. Likahare tsa Sephutheloana

Please check that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, contact your retailer.

• Linear Suspension LED Light Fixture (Model 49350-52H)
• Ntseng bo eketseha bracket
• Lisebelisoa tsa ho Kenya (lisekere, linate tsa terata)
• Buka ea Tataiso

4. Ho seta le ho kenya

Professional installation by a qualified electrician is recommended for this product.

1. Itokisetse ho Kenya:
   • Turn off the electrical power at the main circuit breaker or fuse box.
   • Ensure the mounting surface is structurally sound and can support the weight of the fixture (4.26 kg).
2. Hokela Borakete ea Mounting:
   • Secure the mounting bracket to the ceiling junction box using the provided screws.
3. Wiring the Fixture:
   • Connect the fixture's wires to the corresponding house wires (black to black, white to white, ground to ground) using wire nuts. Ensure all connections are secure.
4. Mount the Fixture:
   • Carefully lift the fixture and attach it to the mounting bracket, securing it with the provided screws.
   • Adjust the suspension cables to achieve the desired height and level.
5. Khutlisa Matla:
   • Hang ha ts'ebetso e phethiloe 'me likhokahano tsohle li sireletsehile, khutlisetsa matla ho sekhechana se seholo sa potoloho.

Setšoantšo sa 4.1: E nchocho view of the suspension light, showing the linear base and the individual suspended LED elements, useful for understanding mounting.

Setšoantšo sa 4.2: Lehlakore view of the fixture, illustrating the slim profile of the linear base and the suspension wires for each light source.

5. Litaelo tsa Ts'ebetso

The Globo Lighting AMUR Linear Suspension LED Light is designed for simple operation. Once properly installed and connected to a power source, it can be controlled via a standard wall switch.

• Ho Bulela/Ho Koala: Use the wall switch connected to the fixture's circuit to turn the light on or off.
• Theknoloji ea LED: This fixture uses integrated LED technology, providing efficient and long-lasting illumination. No bulb replacement is necessary.

Setšoantšo sa 5.1: Haufi-ufi view of one of the individual LED light sources, highlighting the crystal embellishments and the integrated LED panel.

6. Tlhokomelo

Tlhokomelo e tloaelehileng e tla thusa ho boloka ponahalo le ts'ebetso ea sesebelisoa sa hau.

• Ho hloekisa:
  • Netefatsa hore motlakase o tima pele o hloekisa.
  • Hlakola sesebelisoa ka lesela le bonolo, le omeletseng.
  • For stubborn marks, a slightly damp lesela le nang le sesepa se bonolo le ka sebelisoa, le lateloa ke lesela le omeletseng.
  • Do not use abrasive cleaners or solvents, as these can damage the finish and crystal elements.
• Tlhokomelo ea LED: The integrated LED light sources do not require replacement. If the LEDs cease to function, the entire fixture may need professional inspection or replacement.

Setšoantšo sa 6.1: View from below showing multiple LED light sources, illustrating the light output and the arrangement of the crystal diffusers.

7. Ho rarolla mathata

If you experience issues with your fixture, refer to the following common problems and solutions:

If these solutions do not resolve the issue, please contact customer support or a qualified electrician.

8. Litlhaloso

9. Tiisetso le Tšehetso

For warranty information or technical support, please refer to the documentation provided with your purchase or contact Globo Lighting customer service directly. Keep your proof of purchase for warranty claims.

Tlhahisoleseding ea ho ikopanya hangata e ka fumanoa ho moetsi websetsheng kapa sephuthelong sa sehlahiswa.