Woods 50012WD 2-Outlet Outdoor 24-Hour Heavy Duty Mechanical Timer User Manual

1. Selelekela

This manual provides instructions for the safe and efficient use of your Woods 50012WD 2-Outlet Outdoor 24-Hour Heavy Duty Mechanical Timer. This device is designed to automate the on/off cycles of outdoor electrical devices, such as seasonal lighting or pond pumps, for convenience and energy saving.

The timer features two grounded outlets and a durable, weather-resistant housing suitable for outdoor use. Please read this manual thoroughly before installation and operation.

2. Boitsebiso ba Bohlokoa ba Tšireletseho

TLHOKOMELISO: Ho fokotsa kotsi ea mollo, ho thothomela ha motlakase, kapa kotsi ea motho, kamehla latela mehato ena ea motheo ea tšireletso:

• Do not immerse the timer in water or expose it to direct water spray. It is weather-resistant, not waterproof.
• Ensure the timer is plugged into a Ground Fault Circuit Interrupter (GFCI) protected outlet when used outdoors.
• Do not exceed the electrical ratings of the timer: 125V, 15A, 1875W, 60Hz.
• Always unplug the timer from the power source before cleaning or performing any maintenance.
• Do not use with extension cords that are not rated for outdoor use.
• Keep children away from the timer and connected devices.
• Do not disassemble the timer. There are no user-serviceable parts inside.
• Ensure all connections are secure and dry before applying power.

3. Likahare tsa Sephutheloana

• Woods 50012WD Outdoor Mechanical Timer
• Buka ea litaelo (tokomane ena)

4. Sehlahisoa Overview

The Woods 50012WD timer features a rotating dial with segments for setting ON/OFF times, a manual override switch, and two grounded outlets.

Setšoantšo sa 1: Pele view of the Woods 50012WD Outdoor Mechanical Timer. The timer is black with a green central dial and a short power cord extending from the bottom. Two grounded outlets are visible on the side.

5. Ho seta le ho kenya

1. Khetha Sebaka: Select a suitable outdoor location that is protected from direct heavy rain and snow, preferably under an overhang or in a sheltered area. Ensure the timer is placed on a stable surface or mounted securely.
2. Plug In the Timer: Insert the timer's power cord into a 125V, 60Hz GFCI-protected outdoor electrical outlet.
3. Hokela Lisebelisoa: Plug the devices you wish to control into the two grounded outlets on the timer. Ensure the total wattagE ea lisebelisoa tse hokahaneng ha e fete 1875W.

6. Litaelo tsa Ts'ebetso

The Woods 50012WD is a 24-hour mechanical timer. Its operation relies on setting the current time and then pushing down segments on the dial to define ON periods.

6.1 Ho Beha Nako ea Hona Joale

1. Locate the rotating dial on the front of the timer. The dial is marked with 24 hours (1-24 or AM/PM indicators).
2. Rotate the entire dial clockwise until the current time aligns with the "TIME NOW" arrow or indicator on the timer's housing. For example, if it's 6 PM, align the "18" (or "6 PM") mark with the indicator.

6.2 Ho Beha Linako tsa ho Bulela/ho Tima

The dial is surrounded by small segments. Each segment typically represents a 15 or 30-minute interval. Pushing a segment fatshe activates the connected device during that time interval. Pulling a segment up deactivates the device.

1. Identify the time periods when you want your connected devices to be ON.
2. For each desired ON period, push the corresponding segments on the dial fatshe.
3. For all other times, ensure the segments are pulled up.
4. The timer will now cycle ON and OFF according to your settings every 24 hours.

6.3 Manual Override Switch

The timer includes a manual override switch, usually located near the dial. This switch allows you to bypass the programmed settings.

• Selekanyi ON: The timer will operate according to the programmed ON/OFF segments.
• E BULETSE kamehla: The connected devices will remain ON, overriding any programmed OFF times.
• E TLOHILE kamehla: The connected devices will remain OFF, overriding any programmed ON times.

Refer to the specific markings on your timer for the exact positions of the manual override switch.

7. Tlhokomelo

• Ho hloekisa: Tlosa sesupa-nako ho tsoa sehokelong sa motlakase pele o hlwekisa. Hlakola bokantle ka sesebelisoa se bonolo, se nang le thapo e nyane.amp lesela. Se ke oa sebelisa li-abrasive cleaners kapa solvents.
• Polokelo: Haeba o boloka sesupa-nako nako e telele, etsa bonnete ba hore se hloekile ebile se omme. Boloka sebakeng se pholileng, se omileng hole le khanya ea letsatsi e tobileng.
• Tlhahlobo: Periodically inspect the timer and its cord for any signs of damage, such as cracks, fraying, or discoloration. If damage is found, discontinue use and replace the unit.

8. Ho rarolla mathata

9. Litlhaloso

• Mohlala: 50012WD
• Mofuta: Heavy Duty Outdoor Mechanical Timer
• Libaka: 2 Libaka tse thehiloeng fatše
• Moqtage Reiti: 125 V
• AmpErage Rating: 15 A
• Lintlha tsa Maqhubu: 60 Hz
• Tekanyetso ea Matla: 1875 W
• Mofuta oa Sebali: 24-Hour Mechanical
• Lebitso: Woods (Southwire/Coleman Cable)
• UPC: 078693500121

10. Tiisetso le Tšehetso

Woods products are manufactured to high-quality standards. For warranty information or technical support, please refer to the official Woods (Southwire/Coleman Cable) websebaka kapa ikopanye le lefapha la litšebeletso tsa bareki.

Ka kopo, boloka bopaki ba theko ea hau bakeng sa likopo tsa tiisetso.

Mokhoa oa puisano: For the most up-to-date support information, please visit the Woods Store on Amazon or the official manufacturer's websebaka.