Kobalt 24-Volt Max-Volt 3/8-in Drive Cordless Impact Wrench (Model #672828) Instruction Manual

1. Boitsebiso ba Tšireletseho

Kamehla bala 'me u utloisise litemoso tsohle tsa polokeho, litaelo, litšoantšo le litlhaloso tse fanoeng ka sesebelisoa sena sa motlakase. Ho hloleha ho latela litaelo tsohle tse thathamisitsoeng ka tlase ho ka fella ka ho tšoha ha motlakase, mollo, le/kapa kotsi e mpe. Boloka litemoso tsohle le litaelo bakeng sa litšupiso tsa nakong e tlang.

Litemoso tse Akaretsang tsa Tšireletso ea Sesebelisoa sa Matla

• Tšireletseho ea Sebaka sa Mosebetsi: Boloka sebaka sa mosebetsi se hloekile ebile se khantšitse hantle. Libaka tse petetsaneng kapa tse lefifi li mema likotsi. Se ke oa sebelisa lisebelisoa tsa motlakase maemong a sepakapaka a phatlohang, joalo ka moo ho nang le maro a tukang, likhase kapa lerōle. Lisebelisoa tsa motlakase li etsa litlhase tse ka hotetsang lerole kapa mosi.
• Tšireletseho ea Motlakase: Qoba ho ama 'mele le libaka tse theohileng joalo ka liphaephe, li-radiator, lirafshoa le lihatsetsi. Ho na le kotsi e eketsehileng ea ts'oaetso ea motlakase haeba 'mele oa hau o le fatše.
• Tšireletseho ea Botho: Always wear eye protection. Use appropriate personal protective equipment such as dust masks, non-skid safety shoes, hard hats, or hearing protection for appropriate conditions.
• Tšebeliso le Tlhokomelo ea Lisebelisoa: U se ke ua qobella sesebelisoa sa matla. Sebelisa sesebelisoa sa motlakase se nepahetseng bakeng sa ts'ebeliso ea hau. Sesebelisoa se nepahetseng sa motlakase se tla etsa mosebetsi hantle le ho bolokeha ka sekhahla seo se etselitsoeng sona.
• Tšebeliso le Tlhokomelo ea Sesebelisoa sa Betri: Tlatsa hape ka tjhaja e boletsoeng ke moetsi. Chaja e loketseng mofuta o mong oa betri e ka baka kotsi ea mollo ha e sebelisoa le pakete e 'ngoe ea betri.

2. Sehlahisoa Overview

The Kobalt 24-Volt Max-Volt 3/8-in Drive Cordless Impact Wrench (Model #672828) is a versatile and powerful tool designed for efficient fastening and loosening tasks. Its compact size makes it ideal for working in tight spaces, while the brushless motor ensures long-lasting performance and high torque output.

Likarolo tsa Bohlokoa:

• Brush e se nang likoloi: Delivers 150-ft-lbs of torque in forward and reverse for effortless tightening and removal of large bolts.
• Electronic Variable-Speed Control: Generates up to 2,300-RPM at no-load speed and 3,500-IPM for faster application speed.
• Leseli la Mosebetsi la LED le hahiloeng ka hare: Illuminates dimly lit work spaces for improved visibility.
• Tšebelisano: Compatible with all Kobalt 24-volt max batteries and chargers (sold separately).

Figure 1: Kobalt 24-Volt Max-Volt 3/8-in Drive Cordless Impact Wrench. This image shows the main product unit with its battery attached, highlighting its compact design and blue/black color scheme.

3. Litlhaloso

4. Seta

Ho kenya Battery

1. Ensure the impact wrench is turned off and the forward/reverse switch is in the center (locked) position.
2. Align the battery pack with the battery port on the bottom of the tool.
3. Tsamaisa pakete ea betri ka har'a sesebelisoa ho fihlela e tobetsa ka mokhoa o sireletsehileng sebakeng sa eona. Netefatsa hore e lutse ka botlalo.
4. Ho ntsha betri, tobetsa konopo ya ho lokolla hodima pakete ya betri ebe o e thellela ka ntle ho sesebediswa.

Ho kenya Socket

1. Ensure the impact wrench is turned off.
2. Align the square drive of the desired 3/8-inch socket with the anvil on the impact wrench.
3. Push the socket firmly onto the anvil until it locks into place. A detent pin or hog ring mechanism will secure the socket.
4. To remove, pull the socket firmly off the anvil.

5. Litaelo tsa Ts'ebetso

Ho tima/Ho tima

• To turn the tool on, squeeze the variable-speed trigger. The LED work light will illuminate.
• To turn the tool off, release the variable-speed trigger.

Ts'ebetso ea ho ea pele/ho khutlisa

• The forward/reverse switch is located above the trigger.
• Push the switch to the left for forward rotation (tightening).
• Push the switch to the right for reverse rotation (loosening).
• Bakeng sa polokeho, beha switch sebakeng se bohareng ho notlela seqhutsu le ho thibela ho qala ka phoso.

Taolo ea lebelo e feto-fetohang

• The tool's speed is controlled by the amount of pressure applied to the trigger.
• Squeeze the trigger gently for lower speeds and increased control.
• Squeeze the trigger fully for maximum speed and power.

Figure 2: The impact wrench being used to remove a bolt. This image demonstrates the tool's application in a practical scenario, showing its compact size and ease of handling.

6. Tlhokomelo

Ho hloekisa

• Keep the tool's air vents clear and free of debris to prevent overheating.
• Sebelisa e hloekileng, damp cloth to wipe down the exterior of the tool. Do not use solvents or harsh chemicals.

Polokelo

• Store the tool and battery in a cool, dry place away from direct sunlight and excessive heat.
• Tlosa pakete ea betri sesebelisoa pele u e boloka nako e telele.

7. Ho rarolla mathata

Sesebelisoa ha se Qale

• Hlahloba Betri: Ensure the battery pack is fully charged and properly inserted into the tool.
• Check Forward/Reverse Switch: Make sure the switch is not in the center (locked) position.

Low Power/Performance

• Hlahisa Betri: A low battery charge can significantly reduce power output.
• Hlahloba Socket: Ensure the correct size and type of socket is being used and that it is not worn or damaged.

8. Tiisetso le Tšehetso

For warranty information, service, or support regarding your Kobalt 24-Volt Max-Volt 3/8-in Drive Cordless Impact Wrench (Model #672828), please refer to the documentation included with your product at the time of purchase or visit the official Kobalt websebaka. Boloka bopaki ba hau ba theko bakeng sa likopo life kapa life tsa waranti.