Minka Lavery Camden Square Mini Chandelier (Model 4875-283) Bukana ea Taelo

Boitsebiso ba Bohlokoa ba Tšireletseho

Please read these instructions carefully before beginning installation. Failure to follow these instructions could result in electrical shock, fire, or other hazards that could cause injury or property damage.

• Always disconnect power at the main fuse or circuit breaker box before installing, servicing, or cleaning this fixture.
• Ikopanye le ramotlakase ea tšoanelehang haeba o sa tiisehe ka tšebetso ea ho kenya.
• This fixture is designed for indoor use only. Do not install in wet or damp libaka.
• Netefatsa hore dikgokelo tsohle tsa motlakase di latela melao le ditaelo tsa lehae, hammoho le Molao wa Naha wa Motlakase (NEC).
• The fixture operates on 120 Volts.
• This product is ETL approved for safety in the US and Canada.

Litaba tsa Sephutheloana

Verify that all components are present before beginning assembly. If any part is missing or damaged, do not attempt to assemble or install the fixture.

• Chandelier Fixture (1)
• Mounting Hardware Kit (1)
• 72-inch Chain (1)
• 120-inch Electrical Wire (pre-attached)
• Clear Seeded Glass Panels (pre-installed)

Note: Light bulbs are not included. This fixture requires four (4) B10.5 Candelabra Base (E12) bulbs, maximum 60 watts each.

Litaelo tsa ho Hloma

Follow these steps carefully to install your Minka Lavery Camden Square Mini Chandelier.

1. Itokisetse ho kenya

1. Turn off the electrical power at the main fuse or circuit breaker box.
2. Clear the work area and gather necessary tools (screwdriver, wire strippers, electrical tape, ladder).
3. Carefully unpack the fixture and its components.

2. Kenya Sekema

1. Attach the mounting bracket from the hardware kit to the junction box in the ceiling. Ensure it is securely fastened.
2. Determine the desired hanging height for the chandelier. The fixture's height can be adjusted from 23.5 inches to 94 inches. Adjust the chain length accordingly by removing links if necessary.
3. Thread the electrical wire through the chain and the canopy.
4. Connect the chain to the fixture loop and the canopy loop.

3. Wire the Fixture

1. Connect the fixture's bare copper or green ground wire to the house supply ground wire (usually bare copper or green) using a wire connector.
2. Connect the fixture's white wire to the house supply white (neutral) wire using a wire connector.
3. Connect the fixture's black wire to the house supply black (hot) wire using a wire connector.
4. Ka hloko kenya lithapo tsohle ka har'a lebokose la mateano.
5. Secure the canopy to the mounting bracket, ensuring it sits flush against the ceiling.

4. Install Light Bulbs

1. Screw four (4) B10.5 Candelabra Base (E12) bulbs (not included) into the sockets. Do not exceed the maximum wattage ea 60 watts ka tleloubu.

5. Khutlisa Matla

1. Turn the electrical power back on at the main fuse or circuit breaker box.
2. Test the fixture to ensure proper operation.

Figure 1: Minka Lavery Camden Square Mini Chandelier (Model 4875-283) installed.

Litaelo tsa Ts'ebetso

Once installed and powered, the Minka Lavery Camden Square Mini Chandelier operates via a standard wall switch connected to the fixture's circuit. Ensure the correct type and wattage of bulbs are used for optimal performance and safety.

• Use four (4) B10.5 Candelabra Base (E12) bulbs.
• Do not exceed 60 watts per bulb, for a total maximum wattage of 240 watts for the fixture.

Tlhokomelo

Tlhokomelo ea kamehla e tla thusa ho boloka ponahalo le ts'ebetso ea chandelier ea hau.

• Ho hloekisa: To clean the fixture, ensure power is off. Wipe with a soft, dry cloth. Do not use abrasive cleaners, polishes, or solvents as they may damage the finish or glass.
• Phetoho ea Bulb: Before replacing bulbs, turn off the power to the fixture. Allow bulbs to cool completely. Unscrew old bulbs and replace with new B10.5 Candelabra Base (E12) bulbs, not exceeding 60 watts each.

Ho batle phoso

If you experience issues with your chandelier, refer to the following common problems and solutions:

If problems persist after attempting these solutions, contact a qualified electrician for assistance.

Litlhaloso

Warranty le Tšehetso

Minka Lavery products are manufactured to high-quality standards and are backed by a manufacturer's warranty. For specific warranty details, claims, or technical support, please refer to the warranty card included with your purchase or visit the official Minka Lavery websebaka.

For further assistance, you may contact Minka Lavery customer service directly. Keep your purchase receipt and model number (4875-283) handy for quicker service.

Lisebelisoa tsa Marang-rang: Visit the Minka Lavery Store on Amazon