Selelekela
This manual provides detailed instructions for the safe installation, operation, and maintenance of your RAB Lighting LED Bullet Flood 2x12W Adjustable Dual Heads fixture. Please read this manual thoroughly before installation and retain it for future reference.
Boitsebiso ba Bohlokoa ba Tšireletseho
- TLHOKOMELISO: Kotsi ea ho tsosoa ke motlakase. Tlosa motlakase ho fuse kapa sekhechana sa potoloho pele u kenya kapa u sebeletsa.
- Ho kenya ho lokela ho etsoa ke setsebi sa motlakase se tšoanelehang ho latela melao eohle ea motlakase ea naha le ea lehae.
- Se ke oa kenya haufi le lisebelisoa tse tukang.
- Etsa bonnete ba hore sesebelisoa se tsitsitse hantle.
- U se ke ua leka ho fetola sesebelisoa.
- Suitable for wet locations, wall mount only.
Litaba tsa Sephutheloana
Netefatsa hore likarolo tsohle li teng pele u qala ho kenya:
- RAB Lighting LED Bullet Flood 2x12W Fixture (1)
- Mounting Hardware (screws, wire nuts) (1 set)
- Buka ea litaelo (1)
Image: RAB Lighting LED Bullet Flood 2x12W Adjustable Dual Heads fixture in white finish. This image shows the two adjustable LED floodlight heads attached to a central mounting base.
Litlhaloso
| Sebopeho | Lintlha |
|---|---|
| Nomoro ea Mohlala | SMSBULLET2X12NA |
| Mohloli oa Matla | Motlakase o nang le Lithapo, Li-volt tse 120 |
| Wattage | 24 Watts (2x12W LED) |
| Sehlahisoa sa Leseli | 1664 Lumens |
| Mocheso oa Mobala | 5000 Kelvin (Bosweu bo Phodileng) |
| Mofuta oa Mohloli oa Leseli | LED |
| Lintho tse bonahalang | Metal (Fixture), Plastic (Shade) |
| Qetella Mofuta | Bosoeu |
| Mofuta oa Tlhophiso | E kentsoeng ka Lebota |
| Tšebeliso ea Ka hare/Kantle | Outdoor (Suitable for wet locations) |
| Litekanyo | 14.3 x 8.2 x 7.8 lisenthimithara |
| Boima ba 'mele | 4.99 liponto |
Ho seta le ho Kenya
Lisebelisoa li Hlokahala: Screwdriver, Wire Strippers, Pliers, Electrical Tape, Voltage Tester, Ladder (if necessary).
- Tima Matla: Locate the circuit breaker or fuse box controlling the power to the installation area. Turn off the power completely before proceeding. Verify power is off using a voltagmohlahlobi.
- Lokisetsa Mounting Surface: Ensure the mounting surface is clean, dry, and structurally sound. This fixture is designed for wall mounting only.
- Mount the Fixture: Secure the fixture's mounting base to the wall using the provided mounting hardware. Ensure a tight and stable connection.
- Lihokelo tsa Mohala: Connect the fixture's wires to the corresponding household electrical wires.
- Connect the ntsho fixture terata ho ntsho (hot) supply wire.
- Connect the tšoeu fixture terata ho tšoeu (neutral) terata ya phepelo.
- Connect the botala or bare copper fixture wire to the botala or bare copper (ground) supply wire.
Sireletsa likhokahano tsohle ka linate tsa terata le teipi ea motlakase.
- Lihokelo tsa Tiiso: Ensure all wire connections are properly insulated and tucked into the junction box.
- Kopano ea ho Qetela: Attach the fixture body to the mounting base, ensuring it is securely fastened.
- Khutlisa Matla: Hang ha ho kenngwa ho phethetswe mme dikgokelo tsohle di sireletsehile, kgutlisetsa motlakase ho circuit breaker kapa lebokoseng la fuse.
Litaelo tsa Ts'ebetso
The RAB Lighting LED Bullet Floodlight is designed for straightforward operation.
- Tlosa/Tima: The fixture is controlled by the wall switch or external control device connected to its power supply.
- Ho Lokisa Lihlooho tsa Leseli: The two LED floodlight heads are independently adjustable. Loosen the adjustment screws on each head, position the light beam as desired, and then securely tighten the screws to maintain the position.
- Light Output: The fixture provides 1664 lumens of 5000K cool white light.
Tlhokomelo
Tlhokomelo e tloaelehileng e netefatsa ts'ebetso e ntle le nako e telele ea lebone la hau la likhohola.
- Ho hloekisa: Nako le nako hloekisa bokantle ba sesebelisoa ka sesepa se bonolo, damp lesela. Se ke oa sebelisa li-abrasive cleaners kapa solvents. Netefatsa hore motlakase o timme pele o hloekisa.
- Tlhahlobo: Annually inspect the fixture for any signs of damage, loose connections, or wear. Address any issues promptly.
- Li-LED: The integrated LED light sources are designed for long life (100,000 hours) and are not user-replaceable.
Ho batle phoso
| Bothata | Lebaka le ka khonehang | Tharollo |
|---|---|---|
| Leseli ha le khanye. | Ha ho na matla ho setsi. Khokahano ea wiring e hlephileng. Faulty switch. | Sheba sekhechana sa potoloho / fuse. Verify all wire connections are secure (ensure power is off first). Lekola kapa fetola switjha. |
| Ho panyapanya ha leseli. | Khokahano ea wiring e hlephileng. Incompatible dimmer switch (if applicable). | Sheba 'me u sireletse likhokahano tsohle tsa wiring. This fixture is not specified as dimmable; ensure it's connected to a standard ON/OFF switch. |
| Tlhahiso e fokotsehileng ea leseli. | Litšila kapa lithōle tse holim'a lense. | Clean the diffusion lens with a soft, damp lesela. |
If issues persist after troubleshooting, contact RAB Lighting customer support.
Boitsebiso ba Warranty
This RAB Lighting product comes with a Limited Warranty. For specific terms, conditions, and duration of the warranty, please refer to the official RAB Lighting website or contact their customer service. Retain your proof of purchase for warranty claims.
Tšehetso ea Bareki
For technical assistance, replacement parts, or warranty inquiries, please contact RAB Lighting directly:
- Websebaka: www.rablighting.com
- Mohala: Refer to the RAB Lighting websaete bakeng sa linomoro tsa hajoale tsa ho ikopanya.