TFA-Dostmann Bingo Radio-Controlled Alarm Clock

Selelekela

The TFA-Dostmann Bingo Radio-Controlled Alarm Clock (Model 60.2528.02) is designed for intuitive and easy use. It features a clear display, silent operation, and an automatic LED backlight for visibility at night. The alarm function offers a gentle wake-up with a gradual increase in intensity. Two distinct alarm times can be set simultaneously using dedicated side switches, with a color indicator showing activation status. This alarm clock also displays the day of the week, date, and ambient room temperature, helping to maintain an optimal sleeping environment (ideally between 16°C and 18°C).

Setšoantšo sa 1: Pele view of the alarm clock showing the display and control buttons.

Tlhophiso

1. Ho kenya Battery

The alarm clock requires 2 AA batteries (included). To install or replace batteries:

1. Beha sekoaelo sa karolo ea betri ka morao ho yuniti.
2. Bula sekwahelo.
3. Kenya libeteri tse 2 tsa AA, ho netefatsa polarity e nepahetseng (+/-).
4. Koala sekoaelo sa karolo ea betri ka mokhoa o sireletsehileng.

Setšoantšo sa 2: Ka morao view with battery compartment and controls.

2. Initial Power-On and Radio Control Synchronization

Upon battery installation, the clock will automatically attempt to synchronize with the radio-controlled time signal. This process may take several minutes. Ensure the clock is placed away from electronic interference for optimal reception.

• The radio signal icon on the display will flash during synchronization.
• Once synchronized, the icon will become solid, and the correct time, date, and day of the week will be displayed.
• If synchronization fails, the clock will operate as a standard quartz clock. You can manually set the time (see 'Setting Time Manually').

Litaelo tsa Ts'ebetso

1. Setting Time Manually (if radio control is unavailable)

If the radio-controlled time signal is not received, you can set the time manually:

1. Tobetsa o hatelle HLOKOMELA button on the back of the clock until the hour digits flash.
2. Sebelisa le + or - buttons on the front to adjust the hour.
3. Tobetsa HLOKOMELA again to confirm the hour and move to minutes.
4. Sebelisa le + or - likonopo ho lokisa metsotso.
5. Tsoela pele ho tobetsa HLOKOMELA to cycle through and adjust year, month, day, and 12/24-hour format as needed.
6. Tobetsa HLOKOMELA one last time or wait a few seconds for the settings to save.

2. Setting Alarms (Alarm 1 and Alarm 2)

Oache e na le lialamo tse peli tse ikemetseng.

1. Tobetsa ea SET 1 button (for Alarm 1) or SET 2 button (for Alarm 2) on the front. The alarm time will appear on the display.
2. While the alarm time is displayed, press and hold the respective HLOKOMELA konopo ho fihlela dinomoro tsa hora di benya.
3. Sebelisa le + or - likonopo ho lokisa hora ea alamo.
4. Tobetsa e fapaneng HLOKOMELA button again to confirm the hour and move to minutes.
5. Sebelisa le + or - dikonopo ho lokisa metsotso ya alamo.
6. Tobetsa e fapaneng HLOKOMELA button one last time or wait a few seconds to save the alarm time.

3. Activating/Deactivating Alarms

Use the slider switches on the side of the clock to activate or deactivate each alarm.

• Slide the switch for Alarm 1 (bell icon with '1') to ON to activate. A color indicator will show it's active.
• Slide the switch for Alarm 2 (bell icon with '2') to ON to activate. A color indicator will show it's active.
• Suthela konopo ho TLOA ho tima alamo.

Setšoantšo sa 3: Lehlakore view showing alarm activation switch.

4. Mosebetsi oa ho Khutsisa

Ha alamo e lla, tobetsa konopo e kgolo SNOOZE & LIGHT button on top of the clock to activate the snooze function. The alarm will pause for approximately 5 minutes and then sound again. This can be repeated multiple times.

5. Automatic Backlight

The clock features an automatic LED backlight for easy viewmaemo a mabone a tlase.

• Fumana sebaka MOSEBETSI LESENYA switch on the back of the clock.
• Suthela konopo ho ON to enable the automatic backlight. A light sensor will detect ambient light levels and illuminate the display discreetly in the dark.
• Suthela konopo ho TLOA to disable the automatic backlight.

Figure 4: Display with automatic backlight in a dark environment.

6. Mocheso Pontšo

The integrated thermometer continuously measures and displays the ambient room temperature. No special settings are required for this function.

Tlhokomelo

1. Ho hloekisa

To clean the alarm clock, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical agents, as these may damage the display or casing.

2. Phetoho ea Battery

Replace batteries when the display becomes dim or functions become erratic. Always replace both batteries at the same time with new AA batteries. Dispose of used batteries responsibly according to local regulations.

Ho batle phoso

• Ha ho pontsho kapa pontsho e lerootho: Check battery polarity. Replace batteries if they are low.
• Radio control not synchronizing: Move the clock to a different location, away from electronic devices that may cause interference. Ensure it is not near metal objects. Manual time setting is an alternative.
• Alamo ha e lle: Ensure the alarm switch on the side is set to ON. Verify the alarm time is correctly set.
• Automatic backlight not working: Netefatsa hore MOSEBETSI LESENYA switch on the back is set to ON. The backlight only activates in dark conditions.

Litlhaloso

Warranty le Tšehetso

TFA-Dostmann products are manufactured with quality and precision. For warranty information, please refer to the documentation included with your purchase or visit the official TFA-Dostmann website. For technical support or inquiries, please contact TFA-Dostmann customer service.

Spare parts availability: 1 Year.