Hotone Nano Legacy Purple Wind 5-Watt Compact Guitar Amp Bukana ea Tataiso ea Hlooho

1. Selelekela

Kea leboha ha u rekileasing the Hotone Nano Legacy Purple Wind 5-Watt Compact Guitar Amp Head. This ultra-compact amplifier head is designed to deliver premium guitar tones, inspired by the legendary Marshall Plexi Super Lead 1959, in a portable format. This manual provides essential information for safe and effective use of your ampmoqhobi.

2. Boitsebiso ba Tšireletseho

• Mohloli oa Matla: Use only the specified power adapter (18V DC, center negative).
• Moea oa moea: Etsa bonnete ba hore ho na le moea o nepahetseng ho thibela mocheso o feteletseng. Se ke oa thibela menyetla ea moea.
• Mongobo: Do not expose the unit to rain, moisture, or excessive humidity.
• Ho tšoara: Handle with care. Avoid dropping or subjecting the unit to strong impacts.
• Litšebeletso: U se ke ua leka ho lokisa yuniti ena ka bouena. Romela litšebeletso tsohle ho basebetsi ba tšoanelehang.
• Khokahano ea Sebui: Kamehla amahanya le amplifier to a speaker cabinet with the correct impedance (4-16Ω) before powering on to prevent damage.

3. Sehlahisoa Overview

The Hotone Nano Legacy Purple Wind is a compact 5-watt guitar amplifier head featuring a 3-band EQ and an FX loop. Its design is inspired by classic British rock tones.

Front Panel Controls

1. KENO: 1/4" mono jack to plug in your guitar.
2. Bass: Controls the low frequency response.
3. HARE: Controls the mid frequency response.
4. KOTSI: Controls the high frequency response.
5. FUMANA: Controls the gain level.
6. BUKA: E laola bophahamo ba molumo.
7. ON / Off switjha: E matlafatsa kapa e tima yuniti.

Lihokelo tsa Panel tse ka morao

1. 18V DC: Plug in DC 18V adapter (center negative).
2. LIFONO/MOHALA: 1/8" stereo jack, for using headphones or recording.
3. TLHOKOMELISO IN: 1/8" stereo jack, for connecting an external music player.
4. FX LOOP RETURN: 1/4" mono jack, connect to your effects output jack.
5. SPEAKER OUTPUT: 1/4" mono jack, connect to your cabinet (speaker 4-16Ω).
6. FX LOOP ROMELA: 1/4" mono jack, connect to your effects input jack (The Effects Loop is a patch point between the pre-amp le matla amp).

4. Seta

1. Connect Speaker Cabinet: Before powering on, connect a speaker cabinet (4-16Ω impedance) to the SPEAKER OUTPUT jack on the rear panel using a 1/4" mono speaker cable. Failure to connect a speaker cabinet before powering on can damage the ampmoqhobi.
2. Kopanya Matla: Plug the included 18V DC power adapter into the 18V DC input on the rear panel, then plug the adapter into a suitable power outlet.
3. Connect Guitar: Plug your guitar into the INPUT jack on the front panel using a 1/4" mono instrument cable.
4. Litlhophiso tsa pele: Turn the VOLUME and GAIN knobs to their minimum (counter-clockwise) positions before powering on.
5. Matlafatsa: Flip the ON/OFF switch to the 'ON' position. The indicator light will illuminate.

5. Litaelo tsa Ts'ebetso

• Ho Fetola Molumo: Use the BASS, MIDDLE, and TREBLE knobs to shape your desired tonal characteristics. Experiment with different settings to find your preferred sound.
• Ho Fetola Phaello: The GAIN knob controls the amount of overdrive and distortion. Turn clockwise for more aggressive tones.
• Ho Fetola Bolumo: The VOLUME knob controls the overall output level of the amplifier. Adjust to your desired listening level.
• Using the FX Loop: Connect external effects pedals between the FX LOOP SEND and FX LOOP RETURN jacks to integrate them into your signal chain after the preamp karolo.
• Headphone/Line Out: For silent practice or direct recording, connect headphones or a line-level device to the PHONES/LINE OUTPUT. This output includes speaker cabinet simulation.
• TLHOKOMELISO IN: Connect an external audio source (e.g., MP3 player, smartphone) to the AUX IN jack to play along with backing tracks.

6. Tlhokomelo

• Ho hloekisa: Sebelisa lesela le bonolo, le omeletseng ho hloekisa amplifier's exterior. Do not use liquid cleaners or solvents.
• Polokelo: Boloka the amplifier in a dry, cool place away from direct sunlight and extreme temperatures.
• Tlhokomelo ea Tube: As a hybrid amplifier, peleamp tube may eventually need replacement. If you notice a significant change in tone or performance, consult a qualified technician.

7. Ho rarolla mathata

8. Litlhaloso

• Output Wattage: 5 Watts
• Mohloli oa Matla: Corded Electric (18V DC, center negative)
• Boima ba Ntho: 15.5 lik'hilograma
• Boholo ba Sehlahisoa: 2.34 x 5.03 x 2.95 lisenthimithara
• Lisebelisoa tse Lumellanang: Katara
• Mofuta oa Sehokelo: 6.35mm Jack (Input, Speaker Output, FX Loop Send/Return), 3.5mm Jack (Phones/Line Out, AUX IN)
• Impedance ea Sebui: 4-16 Ohms
• Nomoro ea Mohlala: TANLA2

9. Livideo tsa Lihlahisoa

10. Tiisetso le Tšehetso

For warranty information and technical support, please refer to the official Hotone websaete kapa ikopanye le morekisi oa hau ea lumelletsoeng. Boloka rasiti ea hau ea theko e le bopaki ba hore u rekile.