Selelekela
This manual provides instructions for the proper installation, operation, and maintenance of the Hager 2500 Series Cylindrical Passage Lock, model 129002. This lock is designed for standard duty commercial applications and is suitable for doors requiring a non-locking function, allowing free passage from either side at all times.
Boitsebiso ba Tšireletseho
Always wear appropriate safety gear, such as gloves and eye protection, during installation. Ensure all tools are in good working condition. If you are unsure about any step, consult a qualified professional.
Litaba tsa Sephutheloana
Netefatsa hore likarolo tsohle li teng pele u qala ho kenya:
- Hager 2500 Series Cylindrical Passage Lock assembly (Withnell Lever Style)
- Mochine oa latch
- Strike plate (ASA Strike)
- Li-screws tse kenyang
- Operating keys (two supplied, for specific internal components, not for locking function)
- Installation template (if included with physical product)
Ho seta le ho Kenya
Follow these steps for proper installation of the Hager 2500 Series Cylindrical Passage Lock.
1. Tokisetso ea Monyako
Ensure your door is prepared with the following standard dimensions:
- Cross Bore: 2-1/8 inches (54 mm) diameter
- Edge Bore (Latch Hole): 1 inch (25 mm) diameter
- Khutlela morao: 2-3/4 inch (70 mm)
Use the provided template (if applicable) to mark and drill holes accurately. Incorrect drilling can affect lock function and security.
2. Install Latch Mechanism
- Insert the latch mechanism into the edge bore of the door, ensuring the bevel of the latch bolt faces the door frame.
- Sireletsa latch ka li-screws tse fanoeng.
3. Install Lock Chassis
- Align the lock chassis with the cross bore, ensuring the spindle engages with the latch mechanism.
- Insert the exterior and interior lever assemblies.
- Secure the lock chassis with the through-bolts or mounting screws. The design features no exposed mounting screws for a clean appearance.
4. Install Strike Plate
- Mark the position for the ASA strike plate on the door frame, aligning it with the latch bolt.
- Chisel out the mortise for the strike plate to sit flush with the door frame.
- Secure the strike plate with the provided screws.
Image 1: Hager 2500 Series Cylindrical Passage Lock, Withnell Lever Style, in Satin Chrome finish. This image shows the complete lever set, including both interior and exterior levers and the cylindrical chassis.
Litaelo tsa Ts'ebetso
The Hager 2500 Series Cylindrical Passage Lock is designed for non-locking applications. It allows free entry and exit at all times.
- To open the door, simply depress the lever handle on either side.
- Release the lever to allow the latch bolt to extend and secure the door in the closed position.
Hlokomela: While two operating keys are supplied, these are typically for internal component access or specific installation adjustments, not for a locking function on a passage set. This lock does not provide security locking.
Tlhokomelo
Regular maintenance ensures the longevity and smooth operation of your lock.
- Ho hloekisa: Hloekisa bokantle ba bokantle ka bonolo, damp cloth. Avoid abrasive cleaners or solvents, which can damage the finish.
- Lubrication: Periodically apply a small amount of graphite-based lubricant to the latch bolt mechanism if it becomes stiff. Do not use oil-based lubricants, as they can attract dust and debris.
- Tlhahlobo: Annually inspect all screws and components for tightness. Tighten any loose screws to prevent excessive wear.
Ho batle phoso
| Bothata | Lebaka le ka khonehang | Tharollo |
|---|---|---|
| Lever e thata kapa e thata ho e reteletsa. | Pokello ya ditshila kapa tlhokeho ya setlolo. | Clean the mechanism and apply graphite lubricant. |
| Bolti ea latch ha e hule ka botlalo. | Misalignment of lock components or strike plate. | Check alignment of lock chassis and strike plate. Ensure screws are tight. |
| Door rattles when closed. | Strike plate not properly aligned or mortised. | Adjust the strike plate position or depth to ensure a snug fit with the latch bolt. |
Litlhaloso
| Sebopeho | Lintlha |
|---|---|
| Nomoro ea Mohlala | 129002 |
| Letoto | 2500 Series |
| Mofuta oa Lock | Cylindrical Passage Lock (Non-locking) |
| Lintho tse bonahalang | Heavy Gauge Steel, Zinc (Handle Material: Zinc) |
| Qetella | Satin Chrome |
| Mokhoa oa Lever | Withnell |
| Khutlela morao | 2-3/4 inch (70 mm) |
| Door Prep - Cross Bore | 2-1/8 inches (54 mm) diameter |
| Door Prep - Latch Hole (Edge Bore) | 1 inch (25 mm) diameter |
| Boithuto ba Matsoho | E seng ka letsoho |
| Kereiti | Grade 2 (Standard Duty Commercial) |
| Plate ea Strike | Leqhoa la ASA |
| Kenyellelitsoe Likaroloana | 2510 WTN US26D (Lock assembly, latch, strike, screws, 2 operating keys) |
Boitsebiso ba Warranty
Hager products are manufactured to high standards. For specific warranty terms and conditions applicable to the 2500 Series Cylindrical Passage Lock, please refer to the official Hager website or contact Hager customer support directly. Keep your purchase receipt as proof of purchase.
Tšehetso ea Bareki
If you require further assistance or have questions regarding your Hager 2500 Series Cylindrical Passage Lock, please contact Hager customer support:
- Websebaka: Visit the official Hager websebaka sa marang-rang bakeng sa lisebelisoa tsa tšehetso le lintlha tsa ho ikopanya.
- Ikopanye le: Refer to the packaging or Hager's website for phone numbers or email addresses.
When contacting support, please have your model number (129002) and purchase details available.