1. Selelekela
Thank you for choosing the Einhell TC-RH 800 E Rotary Hammer. This powerful tool is designed for drilling, hammer drilling, and chiseling in concrete, masonry, wood, and metal. It features an 800W motor, 2.5 Joules of impact energy, and an SDS Plus chuck for quick and secure bit changes. Please read this manual thoroughly before operating the tool to ensure safe and efficient use.
2. Litaelo tsa Kakaretso tsa Tšireletso
Kamehla ela hloko mehato e latelang ea tšireletso ha u sebelisa lisebelisoa tsa motlakase:
- Tšireletseho ea Sebaka sa Mosebetsi: Boloka sebaka sa mosebetsi se hloekile ebile se khantšitsoe hantle. Libaka tse mahlahahlaha kapa tse lefifi li mema likotsi. Se ke oa sebelisa lisebelisoa tsa motlakase libakeng tse phatlohang, joalo ka moo ho nang le maro a tukang, likhase kapa lerōle.
- Tšireletseho ea Motlakase: Li-plug tsa lisebelisoa tsa motlakase li tlameha ho ts'oana le phallo. Le ka mohla u se ke ua fetola plug ka tsela efe kapa efe. Qoba ho ama 'mele ka libaka tse entsoeng ka mobu kapa tse theohileng joalo ka liphaephe, li-radiator, lirase, le lihatsetsi.
- Tšireletseho ea Botho: Always wear eye protection. Use hearing protection when operating noisy tools. Wear a dust mask if operations create dust. Dress properly; avoid loose clothing or jewelry. Secure long hair.
- Tšebeliso le Tlhokomelo ea Lisebelisoa: U se ke ua qobella sesebelisoa sa matla. Sebelisa sesebelisoa sa motlakase se nepahetseng bakeng sa ts'ebeliso ea hau. Tlosa polaka mohloling oa motlakase pele u etsa litokiso, u fetola lisebelisoa kapa u boloka lisebelisoa tsa motlakase.
- Tšebeletso: Etsa hore sesebelisoa sa hau sa motlakase se sebeletsoe ke motho ea tšoanelehang oa ho lokisa ea sebelisang likarolo tse ling tse tšoanang feela. Sena se tla netefatsa hore polokeho ea sesebelisoa sa motlakase e bolokiloe.
3. Likarolo tsa Sehlahisoa
Familiarize yourself with the main components of your Einhell TC-RH 800 E Rotary Hammer:
- SDS Plus Chuck
- Thuso e Thusang
- Botebo Stop
- Mode Selector Switch (Drill, Hammer Drill, Chisel)
- Rotation Direction Switch (Forward/Reverse)
- On/Off Trigger with Speed Control
- Lock-on Button (for continuous operation)
Setšoantšo sa 1: Ho fetaview of the Einhell TC-RH 800 E Rotary Hammer.
Figure 2: The rotary hammer in use, demonstrating its application for drilling into a wall.
Setšoantšo sa 3: Haufi view of the SDS Plus chuck, designed for quick and secure bit changes.
Figure 4: Detail of the rotation direction switch, allowing selection between forward and reverse rotation.
Figure 5: The ergonomic main handle designed for comfortable and secure grip.
Figure 6: The adjustable depth stop, used to set a precise drilling depth.
Figure 7: Einhell brand logo prominently displayed on the tool body, indicating authenticity.
4. Seta
4.1 Ho hokela Setshoaro sa Thuso
The auxiliary handle provides additional grip and control. Loosen the auxiliary handle by turning it counter-clockwise. Slide it onto the tool body to the desired position and tighten it clockwise.
4.2 Installing the Depth Stop
Insert the depth stop rod into the designated hole on the auxiliary handle. Adjust the depth stop to the required drilling depth by sliding it in or out. Secure it by tightening the auxiliary handle.
Figure 8: The SDS Plus chuck with the depth stop rod correctly installed.
4.3 Inserting SDS Plus Drill Bits/Chisels
- Clean the shank of the drill bit or chisel and apply a thin layer of grease.
- Pull back the chuck sleeve and insert the bit into the chuck, rotating it slightly until it engages.
- Release the chuck sleeve. Pull the bit to check if it is securely locked. The bit should have a small amount of axial play, which is normal for SDS Plus systems.
5. Litaelo tsa Ts'ebetso
5.1 Khetho ea Mokhoa
The mode selector switch allows you to choose the appropriate operating mode:
- Ho tjheka (Ho Potoloha Feela): For drilling in wood, metal, or plastics.
- Hammer Drilling (Rotation with Impact): For drilling in concrete and masonry.
- Chiseling (Impact Only): For light chiseling work, such as removing tiles or plaster.
To change the mode, rotate the selector switch to the desired symbol. Ensure the tool is unplugged before changing modes, especially for chiseling, to prevent accidental activation.
5.2 Ho tima/Ho tima le ho Taola Lebelo
Press the On/Off trigger to start the tool. The speed is variable depending on how far you press the trigger. For continuous operation, press the lock-on button while the trigger is fully depressed. To switch off, release the trigger or press it again if the lock-on button is engaged.
5.3 Rotation Direction
Use the rotation direction switch (Figure 4) to select forward or reverse rotation. Forward rotation is for drilling and hammer drilling. Reverse rotation is primarily for unscrewing or freeing jammed drill bits. Change the rotation direction only when the tool is switched off.
6. Tlhokomelo
Regular maintenance ensures the longevity and optimal performance of your rotary hammer.
- Ho hloekisa: Keep the ventilation slots clean to prevent overheating. Wipe the tool housing with a soft, damp lesela. U se ke ua sebelisa lintho tse hloekisang ka thata kapa li-solvents.
- Tlhokomelo ea Chuck: Regularly clean the SDS Plus chuck and apply a small amount of special grease to the bit shanks to ensure smooth operation and prevent wear.
- Cord Inspection: Periodically inspect the power cord for any damage. If damaged, have it replaced by a qualified technician.
- Polokelo: Store the tool in its original case in a dry, secure place, out of reach of children.
7. Ho rarolla mathata
| Bothata | Lebaka le ka khonehang | Tharollo |
|---|---|---|
| Sesebelisoa ha se qale. | Ha ho phepelo ea motlakase. Thapo ea motlakase e senyehile. On/Off switch faulty. | Hlahloba sehokelo sa motlakase le sethibela-maqhubu sa potoloho. Have cord replaced by a qualified technician. Ikopanye le tšehetso ea bareki. |
| Reduced drilling/hammering performance. | Worn drill bit/chisel. Ho khethiloe mokhoa o fosahetseng. Chuck dirty or dry. | Replace with a sharp, appropriate bit. Khetha mokhoa o nepahetseng oa ho sebetsa. Clean and grease the chuck and bit shank. |
| Tool overheat. | Likheo tsa moea tse koetsoeng. Overloading the tool. | Clean ventilation slots. Reduce pressure and allow the tool to cool. Avoid continuous heavy use. |
8. Lintlha tsa Setegeniki
| Sebopeho | Tlhaloso |
|---|---|
| Brand | Einhell |
| Nomoro ea Mohlala | TC-RH 800 E (4257920) |
| Mohloli oa Matla | Motlakase oa Corded |
| Boholo ba Matla | 800 W |
| Matla a Amang | 2.5 J |
| Moqtage | 230 V |
| Matla a Hona Joale | 3.33 A |
| Maximum Rotation Speed | 1000 RPM |
| Sekhahla sa tšusumetso | 5180 BPM |
| Mofuta oa Chuck | SDS Plus |
| Boholo ba Chuck Size | 26 limilimithara |
| Bokhoni ba ho Cheka (Konkreite) | 26 limilimithara |
| Bokhoni ba ho Cheka (Lehong) | 26 limilimithara |
| Bokhoni ba ho Cheka (Tšepe) | 26 limilimithara |
| Boholo ba Torque | 30 Nm |
| Palo ea Mabelo | 1 |
| Litekanyo tsa Sehlahisoa (L x W x H) | 40 x 10.5 x 35.5 cm, |
| Boima ba Ntho | 3.27 lik'hilograma |
| Mmala | Khubedu |
| Mofuta oa Boitsebiso | Tšepe, Plastiki |
| Kenyellelitsoe Likaroloana | Carrying case, Depth stop |
9. Boitsebiso ba Tiisetso
Einhell products are manufactured to high-quality standards and are subject to strict quality controls. This product is covered by the manufacturer's warranty in accordance with the country-specific legal provisions. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Einhell websebaka.
10. Tšehetso
Should you have any questions regarding the operation, maintenance, or troubleshooting of your Einhell TC-RH 800 E Rotary Hammer, please contact Einhell customer service or visit our official website bakeng sa thuso le lisebelisoa tse ling.
Semolao Websebaka: www.einhell.com