Perel E305DIN1 DIN Rail Week Timer Instruction Manual

1. Selelekela

This manual provides detailed instructions for the installation, operation, and maintenance of your Perel E305DIN1 DIN Rail Week Timer. Please read this manual thoroughly before using the device to ensure proper function and safety. The Perel E305DIN1 is designed for precise daily and weekly control of electrical circuits.

2. Likarolo

The Perel E305DIN1 DIN Rail Week Timer offers a range of functionalities for efficient time management of electrical devices:

• Daily and Weekly Programming: Allows for flexible scheduling across days and weeks.
• 8 ON/OFF Program Locations: Configure up to 8 distinct ON and OFF switching times.
• Pontšo ea LCD: Clear display of time, day of the week, and current operating status.
• NiMH Backup Battery: Integrated battery provides up to 200 hours of autonomy after a full charge, preserving settings during power outages.
• 3-Way Manual Override: Easily switch between ON, OFF, and AUTO modes manually.
• Likhetho tsa ho holisa: Designed for DIN rail mounting or wall mounting using the included bracket.
• Sekoaelo se Bonahalang sa Tšireletso: Provides protection for the display and controls.

3. Ho seta le ho kenya

Tlhokomeliso: Installation should only be performed by a qualified electrician. Ensure the main power supply is disconnected before commencing installation.

3.1 Ho hloella

The E305DIN1 timer can be mounted in two ways:

• DIN Rail Mounting: Snap the timer onto a standard 35mm DIN rail within an electrical enclosure.
• Ho Beha Lebota: Use the provided bracket to secure the timer to a wall. Ensure the mounting surface is stable and capable of supporting the device.

3.2 Khokelo ea Motlakase

Refer to the wiring diagram provided with the device for specific connection points. General steps include:

1. Connect the main power supply (220-250VAC, 50Hz) to the designated input terminals.
2. Connect the load (device to be controlled) to the output terminals. Ensure the load's specifications do not exceed the timer's maximum output capacity (16A resistive, 8A inductive).
3. Double-check all connections for tightness and correctness before restoring power.

Image: Perel E305DIN1 DIN Rail Week Timer. This image shows the front view of the timer, highlighting its LCD display, control buttons, and transparent protective cover.

4. Litaelo tsa Ts'ebetso

After installation and power-up, the timer's internal battery will charge. Allow sufficient time for the battery to charge for optimal backup functionality.

4.1 Ho Beha Nako le Letsatsi tsa Hona Jwale

1. Tobetsa ea TŠEBELE konopo.
2. Ha u ntse u tšoere TŠEBELE, tobetsa ea LETSATSI konopo ea ho beha letsatsi la hajoale la beke.
3. Ha u ntse u tšoere TŠEBELE, tobetsa ea HORA konopo ho beha hora ea hajoale.
4. Ha u ntse u tšoere TŠEBELE, tobetsa ea MIN konopo ea ho beha motsotso oa hajoale.

4.2 Linako tsa ho Bula/ho Tima Lenaneo

The timer allows for up to 8 ON/OFF program pairs.

1. Tobetsa ea SEHOLO button once to enter program mode. The display will show '1 ON'.
2. Sebelisa le LETSATSI, HORA, le MIN buttons to set the desired ON time for program 1.
3. Tobetsa SEHOLO hape. Pontšo e tla bontša '1 OFF'.
4. Sebelisa le LETSATSI, HORA, le MIN buttons to set the desired OFF time for program 1.
5. Repeat steps 1-4 for programs 2 through 8.
6. Tobetsa ea TŠEBELE button to exit program mode and return to normal operation.

4.3 Manual Override Function

The manual override function allows you to temporarily change the timer's output state without affecting programmed settings.

• Tobetsa ea MOEKETSI konopo ea ho potoloha mekhoa:
• BULELA: The output is continuously ON, overriding any programmed OFF times.
• TIMA: The output is continuously OFF, overriding any programmed ON times.
• KETSAHALO: The timer operates according to the programmed ON/OFF schedules.

5. Tlhokomelo

The Perel E305DIN1 timer requires minimal maintenance.

• Ho hloekisa: Hlakola bokantle ka lesela le bonolo, le omileng. U se ke ua sebelisa lihlatsoi tse khorofo kapa li-solvent.
• Boloka Battery: The internal NiMH battery is designed for long life. If the timer frequently loses its settings during power outages, the battery may need replacement by a qualified technician.
• Maemo a Tikoloho: Ensure the timer operates within its specified temperature range (-10°C to 40°C) and avoid excessive humidity or direct sunlight.

6. Ho rarolla mathata

If you encounter issues with your Perel E305DIN1 timer, refer to the following common problems and solutions:

• Timer not turning ON/OFF as programmed:
  • Hlahloba hore na sesupa-nako se kene MOSEBETSI mode. If it's in ON or OFF manual override, it will ignore programs.
  • Verify that the programmed ON/OFF times are correctly set and correspond to the current day.
  • Ensure the current time and day are accurately set on the timer.
• Pontšo ha e na letho kapa ea panya-panya:
  • Check the main power supply to the timer.
  • If power is present, the internal backup battery might be completely discharged. Allow the timer to be powered for several hours to recharge the battery.
• Sebali se lahleheloa ke litlhophiso kamora ho tima motlakasetage:
  • The internal NiMH backup battery may not be fully charged or may be at the end of its lifespan. Ensure the timer is continuously powered for at least 24 hours to fully charge the battery. If the issue persists, the battery may need replacement.
• Time drift (timer becomes inaccurate over time):
  • The timer has a specified accuracy of ±1 minute per month. Minor adjustments may be necessary periodically. If the drift is significantly higher, contact support.

Haeba mehato ena e sa rarolle bothata, ka kopo ikopanye le tšehetso ea bareki.

7. Litlhaloso

Below are the technical specifications for the Perel E305DIN1 DIN Rail Week Timer:

8. Tiisetso le Tšehetso

This Perel product is covered by a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the Perel customer service department.

Boloka rasiti ea hau ea theko e le bopaki ba hore u rekile merero ea tiisetso.