TFA 98.1087 Digital Radio-Controlled Alarm Clock User Manual

Selelekela

This manual provides detailed instructions for the setup, operation, and maintenance of your TFA 98.1087 Digital Radio-Controlled Alarm Clock. This compact and functional alarm clock features a radio-controlled time display, two alarm settings with snooze function, a thermometer, and a calendar. Please read this manual carefully to ensure proper use and to fully utilize all features of your device.

Likarolo tsa Bohlokoa:

Radio-controlled time for automatic and precise synchronization.
Two independent alarm settings with different sounds.
Snooze function for temporary alarm interruption.
Integrated thermometer displaying temperature in Celsius or Fahrenheit.
Calendar display with day of the week in multiple languages.
Backlight bakeng sa bonolo viewmaemo a mabone a tlase.
Compact design, ideal for home or travel.

Tlhophiso

1. Ho kenya Battery

The TFA 98.1087 alarm clock requires 2 AAA batteries (included). Follow these steps to install them:

Locate the battery compartment on the back of the alarm clock.
Open the battery compartment cover by sliding it down or lifting the latch.
Kenya libeteri tse peli tsa AAA, ho netefatsa polarity e nepahetseng (+ le -) joalo ka ha ho bontšitsoe ka har'a karolo.
Koala sekoaelo sa karolo ea betri ka mokhoa o sireletsehileng.

Morao view of TFA 98.1087 alarm clock with battery compartment

Setšoantšo: Ka morao view of the alarm clock showing the battery compartment. Ensure batteries are inserted with correct polarity.

Ka morao view of TFA 98.1087 alarm clock showing battery compartment and stand

Setšoantšo: Angled ka morao view of the alarm clock, highlighting the battery compartment and the integrated stand for stable placement.

2. Initial Time Synchronization (Radio Control)

Upon battery installation, the alarm clock will automatically attempt to synchronize with the DCF radio signal (Frankfurt, Germany) to set the correct time, date, and day of the week. This process may take a few minutes. For best reception, place the clock near a window and away from electronic devices that might cause interference.

A radio signal icon will appear on the display to indicate successful reception.
If the signal is weak or unavailable, the clock can be set manually.

Litaelo tsa Ts'ebetso

1. Manual Time and Date Setting

If radio control is not desired or unavailable, you can set the time and date manually:

Tobetsa o hatelle MOKHOA konopo ho fihlela pontsho ya nako e qala ho benya.
Sebelisa le UP (▲) le TLASE (▼) buttons to adjust the hours, then press MOKHOA ho tiisa.
Pheta metsotso, selemo, khoeli le letsatsi.
Tobetsa MOKHOA hape ho tsoa boemong ba ho seta.

Pele view of TFA 98.1087 alarm clock displaying time and buttons

Setšoantšo: Pele view of the alarm clock, showing the digital display and control buttons for setting time and alarms.

2. Setting Alarms (Alarm 1 and Alarm 2)

The clock features two independent alarms. To set an alarm:

Tobetsa ea TLHOKOMELO konopo hang ho view Alarm 1 time. Press again for Alarm 2.
Leha ho le joalo viewing the desired alarm time, press and hold the TLHOKOMELO konopo ho fihlela nako ea alamo e benya.
Sebelisa le UP (▲) le TLASE (▼) buttons to adjust the hours, then press TLHOKOMELO ho tiisa.
Pheta metsotso.
Tobetsa TLHOKOMELO hape ho tsoa boemong ba ho seta.
Ho kenya/ho tima alamo tshebetsong, tobetsa TLHOKOMELO button repeatedly until the alarm icon (bell symbol) for Alarm 1 or Alarm 2 appears/disappears on the display.

3. Mosebetsi oa ho Khutsisa

Ha alamo e lla, tobetsa konopo e kgolo TSOTSANG / LESELI button on top of the clock to temporarily silence the alarm. The alarm will sound again after approximately 4-5 minutes.

4. Stopping the Alarm

To permanently stop an alarm when it is sounding, press any button on the front panel (e.g., TLHOKOMELO, MOKHOA, UP, TLASE) except the TSOTSANG / LESELI button. The alarm will reset for the next day.

5. Backlight

Tobetsa e kholo TSOTSANG / LESELI button on top of the clock to illuminate the display for approximately 5 seconds, allowing for easy viewho kena lefifing.

6. Mocheso Pontšo

The clock displays the ambient temperature. To switch between Celsius (℃) and Fahrenheit (℉), press the ℃ / ℉ button (if available, or check manual for specific button). If no dedicated button, it might be part of the MODE settings.

Note: The provided product details indicate "Indicador de temperatura" (Temperature indicator) but do not specify a dedicated button for unit change. This function is typically found within the MODE settings or a specific C/F button.

7. Dual Time Setting

The clock supports a dual time function, allowing you to display a second time zone. Consult the full product manual for specific instructions on setting and switching to dual time mode, as this often involves a combination of button presses.

Lehlakore view of TFA 98.1087 alarm clock with integrated stand

Setšoantšo: Lehlakore view of the alarm clock, illustrating its compact profile and stable integrated stand.

Tlhokomelo

1. Phetoho ea Battery

When the display dims or the clock functions become erratic, it is time to replace the batteries. Follow the battery installation steps in the "Setup" section. Always replace both batteries at the same time with new AAA alkaline batteries. Dispose of old batteries responsibly according to local regulations.

2. Ho hloekisa

Clean the alarm clock with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the casing or display. Avoid exposing the device to excessive moisture.

Ho batle phoso

Bothata	Lebaka le ka khonehang	Tharollo
Pontšo ha e na letho kapa e lerootho.	Libetri tse tlase kapa tse felileng.	Fetola ka libeteri tse ncha tsa AAA.
Time is incorrect or not setting automatically.	Weak or no radio signal reception.	Move the clock to a location with better reception (e.g., near a window). Ensure no electronic devices are causing interference. Set the time manually as described in "Manual Time and Date Setting".
Alamo ha e lle.	Alamo ha e sebetse kapa e setilwe ka phoso.	Verify that the alarm icon is displayed for the desired alarm. Check that the alarm time is set correctly. Netefatsa hore libeteri ha li felisoe.
Buttons are unresponsive or difficult to press.	General wear or internal issue.	Ensure the clock is clean and free of debris around buttons. If issues persist, contact customer support or consider warranty options.
Alarm volume is too loud/quiet.	Fixed volume setting.	The alarm volume is generally fixed. Some users have reported modifying the speaker opening on the back with a small piece of cloth to dampen the sound if it's too loud. This is an unofficial modification and should be done with caution.

Litlhaloso

Nomoro ea Mohlala: 98.1087
Lebitso: TFA
Boholo: 4.6 x 7.8 x 8 cm (1.8 x 3.1 x 3.1 lisenthimithara)
Boima ba 'mele: 160 g (0.35 lbs)
Mohloli oa Matla: 2 x AAA libeteri (tse kenyelelitsoe)
Mofuta oa Pontšo: Dijithale
Boitsebiso: Plastiki
Likarolo tse Khethehileng: Alarm, Temperature Indicator, Snooze Function, Radio-Controlled Time
Mmala: Ntsho

Boitsebiso ba Warranty

Specific warranty terms and conditions for the TFA 98.1087 Digital Alarm Clock may vary by region and retailer. Please refer to the warranty card included with your product or contact your point of purchase for detailed information regarding warranty coverage, duration, and claims procedures. Keep your proof of purchase for warranty purposes.

Tšehetso ea Bareki

For further assistance, technical support, or inquiries not covered in this manual, please visit the official TFA website or contact their customer service department. Contact details can typically be found on the manufacturer's packaging or websebaka.

Moetsi: TFA Dostmann GmbH & Co. KG

TFA 98.1087