Elk Home Hartford 9-Light Chandelier User Manual

1. Selelekela

This manual provides detailed instructions for the installation, operation, and maintenance of your Elk Home Hartford 9-Light Chandelier. Please read all instructions carefully before assembly and use to ensure safe and proper functioning of the product. Retain this manual for future reference.

The Elk Home Hartford Chandelier features a traditional style with an Oil Rubbed Bronze finish, designed to accommodate nine candelabra base bulbs. Its dimensions are 29 inches in width, 29 inches in depth, and 28 inches in height, making it suitable for various indoor spaces such as dining rooms, living rooms, and foyers.

2. Boitsebiso ba Tšireletseho

TEMOSO: Sehlahisoa sena se ka u pepesetsa likhemik'hale tse kenyelletsang loto, e tsejoang ke Naha ea California ho baka mofetše le likoli tsa tsoalo kapa likotsi tse ling tsa ho ikatisa. Bakeng sa tlhaiso-leseling e batsi e ea ho www.P65 Litemoso.ca.gov. Please check your local laws before purchasing sehlahisoa sena.

• Always turn off the main power supply at the circuit breaker before beginning installation or performing any maintenance.
• Ikopanye le ramotlakase ea tšoanelehang haeba u sa tloaelane le likhoele tsa motlakase.
• Ensure all connections are secure and correct to prevent electrical shock or fire.
• Se ke oa feta boholo ba wattage boletsoeng bakeng sa mabone.
• Tšoara likarolo tsa khalase ka hloko ho thibela ho robeha.

3. Likahare tsa Sephutheloana

Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, contact Elk Home customer service.

• Chandelier Frame (main body with arms)
• Mounting Hardware (canopy, mounting plate, screws, wire nuts)
• Chain and Rod Assembly
• Buka ea Tataiso

Note: Nine 60 Watt B11 Candelabra Base Bulbs are ha e kenyelelitsoe mme e tlameha ho rekoa ka thoko.

4. Ho seta le ho kenya

This chandelier is a hardwired, ceiling-mounted fixture. Professional installation is recommended.

4.1. Boitokisetso

1. Tima Matla: Locate the circuit breaker that supplies power to the installation location and turn it off.
2. Hlakola: Carefully remove all components from the packaging. Place them on a clean, soft surface to prevent scratches.
3. Review Setšoantšo: Familiarize yourself with the parts and assembly steps by reviewing the provided diagram (if applicable).

4.2. Mehato ea Kopano

1. Hokela Mounting Plate: Secure the mounting plate to the junction box in the ceiling using the provided screws. Ensure it is firmly attached.
2. Fetola Bolelele ba Chain: Determine the desired hanging height for your chandelier. The chain length is adjustable. Use appropriate tools to remove excess chain links if necessary.
3. Hokela Wiring: Carefully connect the electrical wires from the chandelier to the house wiring.
• Connect the black wire (live) from the fixture to the black wire (live) from the junction box.
• Connect the white wire (neutral) from the fixture to the white wire (neutral) from the junction box.
• Connect the green or bare copper wire (ground) from the fixture to the green or bare copper wire (ground) from the junction box.
• Secure all connections with wire nuts and wrap with electrical tape for added security.
4. Sireletsehile Canopy: Carefully push the canopy up against the ceiling, covering the junction box and wiring connections. Secure it in place using the provided hardware.
5. Kenya Li-bulbs: Screw nine B11 Candelabra Base bulbs (E12 base, max 60W each) into the sockets. Do not overtighten.

Figure 4.2.1: Ceiling canopy and chain connection point.

Figure 4.2.2: Detail of the upper rod and chain connection.

Figure 4.2.3: Candelabra arms and bulb sockets.

Figure 4.2.4: Central body and curved arms detail.

Figure 4.2.5: Fully assembled Elk Home Hartford 9-Light Chandelier.

5. Litaelo tsa Ts'ebetso

Once installed and bulbs are in place, restore power at the circuit breaker.

• Tlosa/Tima: Operate the chandelier using a standard wall switch.
• Ts'ebetso ea Dimming: This fixture is dimmable. If you wish to use a dimming feature, ensure you have a compatible dimmer switch installed and use dimmable bulbs.
• Tšebelisano ea Bulb: The chandelier is designed for incandescent bulbs but is also compatible with LED bulbs, provided they have an E12 candelabra base and are suitable for the fixture's voltage (120 Volts).

6. Tlhokomelo

Regular maintenance ensures the longevity and appearance of your chandelier.

• Ho hloekisa: Turn off power before cleaning. Use a soft, dry cloth to wipe down the metal finish. Avoid abrasive cleaners or solvents, as they may damage the finish.
• Phetoho ea Bulb: Turn off power before replacing bulbs. Allow old bulbs to cool completely before removal. Replace with new B11 Candelabra Base (E12) bulbs, not exceeding 60 watts per bulb.
• Tlhahlobo: Nako le nako hlahloba likhokahano tsohle le lisebelisoa tse ntseng li hola ho netefatsa hore li lula li bolokehile.

7. Ho rarolla mathata

Haeba u kopana le mathata ka chandelier ea hau, sheba mathata a latelang le tharollo:

8. Litlhaloso

9. Tiisetso le Tšehetso

9.1. Boitsebiso ba Tiisetso

This Elk Home Hartford 9-Light Chandelier comes with a 1-year manufacturer's warranty against defects. This warranty covers manufacturing defects in materials and workmanship under normal use and service. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modifications.

9.2. Tšehetso ea Bareki

For technical assistance, missing parts, or warranty claims, please contact Elk Home customer service. Refer to the contact information provided with your purchase or visit the official Elk Home website bakeng sa lintlha tsa tšehetso.

When contacting support, please have your model number (289-OB) and proof of purchase readily available.