Intermatic Digital 7-Day Programmable Wall Switch Timer SS7C User Manual

Selelekela

The Intermatic SS7C Digital 7-Day Programmable Wall Switch Timer is designed to control lighting and heavy-duty loads such as fans and appliances. This timer offers precise control with up to six ON/OFF settings per day, totaling 42 settings per week. It features a digital clock, battery backup, and various programming options to suit your schedule.

Boitsebiso ba Tšireletseho

TLHOKOMELISO: Risk of electric shock. Installation requires working with high voltage wiring. Always turn off power at the circuit breaker or fuse box before installation or servicing. If you are unsure about any part of these instructions, consult a qualified electrician. Do not exceed the electrical ratings of the device.

• Netefatsa hore motlakase o khaotsoe pele o kenya.
• Latela likhoutu tsohle tsa motlakase tsa lehae le tsa naha.
• Sesebelisoa sena ke sa ts'ebeliso ea kahare feela.

Litaba tsa Sephutheloana

Netefatsa hore likarolo tsohle li teng pele u qala ho kenya:

• Intermatic SS7C Digital Wall Switch Timer Unit
• Mounting Screws
• Linate tsa terata
• Buka ea litaelo (tokomane ena)

Ho seta le ho Kenya

Lisebelisoa li Hlokahala: Screwdriver, Wire Strippers, Electrical Tape.

1. Tima Matla: Locate the circuit breaker or fuse that controls the power to the switch you are replacing. Turn it OFF. Verify power is off using a voltagmohlahlobi.
2. Tlosa Phetoho e teng: Carefully remove the wall plate and unscrew the existing switch from the wall box. Disconnect the wires from the old switch. Note the wiring configuration (e.g., line, load, ground).
3. Wire the SS7C Timer: Connect the wires from the wall box to the SS7C timer using the provided wire nuts. Refer to the wiring diagram below for typical connections. Ensure all connections are secure.
   

   Setšoantšo: Pele view of the Intermatic SS7C Digital Wall Switch Timer. This image shows the digital display and control buttons, which are essential for programming and operation.

   • Mohala oa Mohala: Connect to the timer's LINE terminal.
   • Load Wire: Connect to the timer's LOAD terminal.
   • Ground Wire: Connect to the timer's GROUND terminal.
   • Neutral Wire (if applicable): Some installations may require a neutral wire. Consult your local electrical codes.
4. Mount the Timer: Gently push the wired timer into the wall box. Secure it with the mounting screws. Attach the wall plate.
5. Khutlisa Matla: Turn the power back ON at the circuit breaker or fuse box. The timer display should illuminate.

Ho sebetsa le ho etsa mananeo

The SS7C timer allows for flexible programming with up to 6 ON/OFF settings per day.

1. Setting Current Time and Day

1. Tobetsa ea TŠEBELE konopo. Pontšo ea nako e tla benya.
2. Sebelisa le HORA le MOTSOTSO buttons to adjust the current time.
3. Tobetsa ea LETSATSI konopo ea ho beha letsatsi la hajoale la beke.
4. Tobetsa TŠEBELE again to save and exit, or wait a few seconds for it to save automatically.

2. Programming ON/OFF Events

The timer supports up to 6 ON/OFF programs per day, for a total of 42 per week.

1. Tobetsa ea SEHOLO button. The display will show "1 ON".
2. Sebelisa HORA, MOTSOTSO, le LETSATSI buttons to set the desired ON time and day(s) for Program 1. You can select specific days (e.g., M, Tu, W, Th, F, Sa, Su), weekdays (M-F), weekends (Sa-Su), or all 7 days.
3. Tobetsa SEHOLO hape. Pontšo e tla bontša "1 OFF".
4. Set the desired OFF time and day(s) for Program 1 using the HORA, MOTSOTSO, le LETSATSI likonopo.
5. Repeat steps 1-4 for additional programs (2 ON/OFF through 6 ON/OFF).
6. After setting all desired programs, press TŠEBELE ho kgutlela tshebetsong e tlwaelehileng.

3. Phethahatso ka letsoho

To manually turn the connected device ON or OFF outside of programmed times, press the BONAHALA/TSHA button. This will temporarily override the current program until the next scheduled ON or OFF event.

4. Random Setting Feature

The random setting feature can be activated to vary ON/OFF times slightly, creating a lived-in appearance when you are away. Consult the full manual for specific activation steps for the random feature.

Tlhokomelo

The Intermatic SS7C timer is designed for low maintenance. The internal battery backup maintains programming for up to three years, even during power failures.

• Phetoho ea Betri: If the display becomes dim or programming is lost frequently during power outages, the internal battery may need replacement. This typically requires professional servicing or careful adherence to specific instructions not detailed here.
• Ho hloekisa: Clean the timer's surface with a soft, damp lesela. Se ke oa sebelisa li-abrasive cleaners kapa solvents.

Ho batle phoso

Litlhaloso

• Lebitso: Intermatic
• Nomoro ea Mohlala: SS7C
• Boima ba Ntho: 0.35 Liponto
• Nomoro ea Litlhophiso: 7-day programmable, up to 6 ON/OFF settings per day (42 per week)
• Boholo ba skrini: 1.5 lisenthimithara
• Mmala: Bosoeu
• Moetsi: INTERMATIC INC
• UPC: 078275056732
• ASIN: B0000BYDA2

Warranty le Tšehetso

This Intermatic SS7C Digital 7-Day Programmable Wall Switch Timer comes with a Tiisetso ea selemo e lekanyelitsoeng ea moetsi ho tloha ka letsatsi la theko. Tiisetso ena e koahela mefokolo ea thepa le moetso tlas'a tšebeliso e tloaelehileng.

For warranty claims, technical assistance, or further support, please contact Intermatic customer service. Keep your proof of purchase for warranty validation.

For the most up-to-date support information, please visit the official Intermatic websaete kapa sheba lintlha tsa ho ikopanya tse fanoeng le sephutheloana sa sehlahisoa sa hau.