Lisebelisoa tsa AEMC MN252 AC Hona Joale Probe
TLHALOSO
MN252/MN253 (Catalog #2115.78 le #2115.79) ke tsa morao-rao ho compact AC Current probes. E etselitsoe ho fihlela litlhoko tse thata ka ho fetisisa indastering le likonteraka tsa motlakase, li boetse li kopana le litekanyetso tsa morao-rao tsa polokeho le ts'ebetso. Li-probes li na le tekanyo ea tekanyo e fihlang ho 240 Arms e leng se etsang hore e be lisebelisoa tse phethahetseng tsa ho lekanya ka li-DMM, lirekoto, matla le li-haronic metres. Mefuta ea MN252/MN253 e lumellana le voltmeter efe kapa efe ea AC, multimeter, kapa vol.tagsesebelisoa sa ho lekanya se khonang ho hlahisa 10 mV ea tlhahiso ka 'ngoe amp ea hona joale e lekantsoeng, ho nepahala ha voltmeter ea 0.75% kapa ho feta le ho sitisa ho kenya letsoho ha ≥ 1M
TLHOKOMELO
Litemoso tsa polokeho li fanoa ho netefatsa polokeho ea basebetsi le ts'ebetso e nepahetseng ea sesebelisoa. Bala taelo ka botlalo.
- Sebelisa tlhokomeliso ho potoloho efe kapa efe: matla a ka bang phahamengtagmaqhubu le maqhubu a teng 'me a ka baka kotsi e tšosang.
- U se ke ua sebelisa probe haeba e senyehile. Kamehla o hokela probe ea hajoale ho sesebelisoa sa ho metha pele o hokeloa ho potoloha conductor
- Se ke oa sebelisa conductor e se nang insulated e nang le monyetla oa ho theola tšilafalo e fetang 600V CAT III 2. E-ba hlokolosi haholo haampho pota-pota li-conductor tse se nang letho kapa maballo a libese.
- Pele o sebelisoa, hlahloba probe; sheba mapetsong a matlo kapa a tsoang ka har'a likhoele tsa motlakase.
- Se ke oa sebelisa clamp tikolohong e metsi kapa dibakeng tseo ho nang le digase tse kotsi.
- U se ke ua sebelisa probe kae kapa kae ka nģ'ane ho mokoallo oa tactile.
LITŠOANTŠISO TSA MOHLASE
Letšoao lena le bolela hore probe ea hona joale e sirelelitsoe ke ho pata habeli kapa ho matlafatsoa. Sebelisa feela likarolo tse ncha tse boletsoeng ke feme ha u sebeletsa sesebelisoa.
Letšoao lena le bolela TLHOKOMELISO! mme o kopa hore mosebelisi a bue ka bukana ea mosebelisi pele a sebelisa sesebelisoa.
Ena ke sensor ea hona joale ea mofuta oa A. Letšoao lena le bolela hore kopo ea ho potoloha le ho tlosoa ha li-conductor tsa HAZARDOUS LIVE e lumelletsoe
TLHALOSO EA MEKHATLO EA LEKOLO
KATSA II: Bakeng sa litekanyo tse etsoang lipotolohong tse amanang ka kotloloho le sistimi ea kabo ea motlakase. Examplitekanyo tsa lisebelisoa tsa ntlo kapa lisebelisoa tse nkehang habonolo.
CAT III: Bakeng sa litekanyo etsoa mohahong tlhomamiso boemong kabo tse kang ka thepa hardwired ka tlhomamiso e tsitsitseng le breakers potoloho.
CAT IV: Bakeng sa litekanyo tse etsoang mohloling oa motlakase oa mantlha (<1000V) joalo ka lisebelisoa tsa ts'ireletso tsa overcurrent, li-ripple control unit, kapa metres.
HO FUMANA MOROBE
Ha u fumana thomello ea hau, etsa bonnete ba hore litaba tse ka hare li lumellana le lenane la ho paka. Tsebisa morekisi oa hau ka lintho tse sieo. Haeba thepa e bonahala e senyehile, file tleleime hang-hang le mofani oa thepa le ho tsebisa mofani oa hau hang-hang, ho fana ka tlhaloso e qaqileng ea tšenyo leha e le efe.
LIEKETSENG MOTLATSI
Nominal Range: 200A
Lekhalo la Tekanyo: 0.1 ho isa ho 240A
Karolelano ea Phetoho: Moqtagtlhahiso
Lets'oao la Tlhahiso: 10mV/A
Ho nepahala le Phase Shift*:
Ho nepahala: 0.5 ho 10A: 3.0% Ho bala ± 5mV
10 ho 40A: 2.5% Ho bala ± 5mV
40 ho 100A: 2.0% Ho bala ± 5mV
100 ho 240A: 1.0% Ho bala ± 5mV
Phase Shift: 0.5 ho 10A: Ha e hlalosoe
10 ho isa ho 40A: ≤ 5°
40 ho isa ho 100A: ≤ 3°
100 ho isa ho 240A: ≤ 2.5”
(* Maemo a litšupiso: 18 ° ho 28 ° C, 20 ho 75% RH, matla a khoheli a ka ntle <40 A / m, 48 ho 65 Hz sine wave, ntho e sothehileng e ka tlase ho 1%, ha ho na karolo ea DC, ha ho na mokhanni ea jereng ea ka ntle , teko sample centered.) Load impedance > 1M
Keketseho: 240A bakeng sa 10 min ON, 30 min OFF
Marang-rang: 40 ho isa ho 10 kHz
Meeli ea Maemo a Ts'ebetso:
200A ka ho sa feleng ho isa ho 1 kHz
Ho theoha ka holimo ho 3 kHz: 200A x (1/0.333 F), F ho kHz
Ntlha ea Crest:
3 @ 200Arms e nang le phoso (ka lebaka la CF) ea 3%
Sebetsa Voltage: Li-600 tsa motlakase
Mokhoa o Tloaelehileng Moqtage: Li-600 tsa motlakase
Tšusumetso ea Mokhanni ea Haufi:
≤ 15mA/A ho 50 Hz
Tšusumetso ea DC ho lets'oao la AC:
DC Hajoale <20A, <5%
Tšusumetso ea Boemo ba Mokhanni Mohlahareng:
0.5% ea tlhahiso ea mV @ 50/60Hz
Tšusumetso ea Maqhubu:
40 Hz ho isa ho 1 kHz: 3% ea tlhahiso ea mV
1 kHz ho isa ho 10 kHz: 12% ea tlhahiso ea mV
Tšusumetso ea Mojaro:
≤ 3% ea tlhahiso ea mA ho tloha ho 40Hz ho ea ho 1kHz
≤ 12% ea tlhahiso ea mA ho tloha ho 1kHz ho ea ho 10kHz
Tšusumetso ea Mocheso:
≤ 150 ppm/°K, kapa 0.15% ea tlhahiso ea mV ka 10°K
Tšusumetso ea Mongobo (10 - 90% RH):
≤ 0.2% ea tlhahiso ea mV ka 10°K @ 18°C ho isa ho 28°C
LIEKETSENG MOCHA
Thempereichara ea ho sebetsa: 14° ho ya ho 131°F (-10° ho ya ho +55°C)
Mocheso oa polokelo: -40° ho ea ho 158°F (-40° ho ea +70°C)
Sebetsa a lekanyelitsoeng mongobo: 10° ho isa ho 35°C 85% RH (ntle le ho theoloa ka holimo ho 35°C)
Maximum Cable Diameter: E 'ngoe Ø 0.78″ (20mm), sebaka sa bese ke 20 x 5mm
Tšireletso ea Nyeoe:
IP 40 (IEC 529)
Teko ea ho oa:
Teko ho latela IEC 68-2-32: 1.0m ho theoha ho 38mm ea
Oak holim'a konkreite.
Mechanical Shock: Teko ka IEC 68-2-27
Tšisinyeho: Teko ka IEC 68-2-6
Boholo: 5.47 x 2.00 x 1.18 ″ (139 x 51 x 30mm)
Boima ba 'mele: 6.5 oz (180g)
Lintho tse entsoeng ka polycarbonate:
Mehlahare: Polycarbonate e nang le 10% fiberglass charger, Red UL 94 V0
NyeoeTlhaloso: Polycarbonate 920A Gray
Lits'ebetso tsa ho bula - Bophelo: > 50,000
Sephetho:
MN252: Li-jacks tse peli tse tloaelehileng tsa polokeho (4mm)
MN253: Moetapele o kentsoeng habeli/o matlafalitsoeng oa 5 ft (1.5m) o nang le polaka ea banana e sireletsehileng ea 4mm
TS'IRELETSO TS'OANE
Motlakase:
Ho pata habeli kapa ho tiisa ho tiisa lipakeng tsa mantlha kapa tsa bobeli le nyeoe ea ka ntle ea sephethephethe e lumellana le IEC 1010-2-32.
Mokhoa o Tloaelehileng Moqtage:
600V CAT III, Tekanyo ea Tšilafalo 2
Matla a Dielectric:
5550V, 50/60 Hz lipakeng tsa mantlha, tsa bobeli le tsa kantle tsa mofeng
Ts'ebetsong ea Electromagnetic:
EN 50081-1 Sehlopha sa B
TS EN 50082-2 Ts'ebetso ea motlakase
Tlhaloso: IEC 1000-4-2
Tšimo ea mahlaseli IEC 1000-4-3
Liphetoho tse potlakileng tsa IEC 1000-4-4
Tšimo ea Magnetic ho 50/60 Hz IEC 1000-4-8
TAELO TSEBISO
AC Current Probe MN252 …………….. Katse #2115.78
AC Current Probe MN253 …………….. Katse #2115.79
Lisebelisoa:
Lieta, sete ea polokeho ea 2, 5 ft
(1000V) bakeng sa Mohlala MN252 …………………. Katse #2111.29
Adapter ea plug ea Banana
(ho plug e sa kengoang) …………………….. Katse #1017.45
TS'EBETSO
Ka kopo etsa bonnete ba hore u se u balile le ho utloisisa ka botlalo karolo ea TEMOSO leqepheng la 1.
Ho etsa Litekanyo ka AC Current Probe Model MN252/MN253
- Hokela lead lead e ntšo ea probe ea hajoale ho "tloaelehileng" le lead lead e khubelu ho AC voltage kenya letsoho ho DMM ea hau kapa molumo o mongtagsesebedisoa sa ho lekanya elektronike. Sesebelisoa sa hajoale sa AC se na le tlhahiso ea 10mV/A. Sena se bolela hore bakeng sa 200AAC ho conductor ho pota-pota moo probe e leng clamped, 2VAC e tla tsoa ho probe e lebisa ho DMM kapa sesebelisoa sa hau. Khetha sebaka se tsamaellanang le nako e lekantsoeng. Haeba boholo ba hona joale bo sa tsejoe, qala ka sebaka se phahameng ka ho fetisisa 'me u sebetse fatše ho fihlela moeli o nepahetseng le qeto e fihletsoeng. Clamp mochochisi o potileng mokhanni. Nka 'malo oa methareng' me u e atise ka 100 ho fumana tekanyo e lekantsoeng (mohlala, 160mV reading = 160×100 = 16,000mA kapa 16A)
- Bakeng sa ho nepahala ho hoholo, qoba ho ba haufi ha li-conductors tse ling tse ka bakang lerata ha ho khoneha.
Malebela a ho Etsa Litekanyo tse Nepahetseng
- Ha u sebelisa probe ea hona joale e nang le meter, ke habohlokoa ho khetha mefuta e fanang ka tharollo e molemo ka ho fetisisa. Ho hloleha ho etsa sena ho ka baka liphoso tsa tekanyo.
- Make sure that probe jaw mating surfaces are free of dust and contamination. Contaminants cause air gaps between the jaws, increasing the phase shift between primary and secondary. It is very critical for power measurement.
TLHOKOMELO
Tlhokomediso
- Bakeng sa tlhokomelo sebelisa feela likarolo tsa pele tsa feme e ncha.
- Ho qoba ho tsukutloa ha motlakase, seke oa leka ho etsa litšebeletso leha e le life ntle le haeba o na le tokelo ea ho etsa joalo.
- Ho qoba ts'oaetso ea motlakase le / kapa tšenyo ea sesebelisoa, u se ke ua kenya metsi kapa lisebelisoa tse ling tsa kantle ho probe
Ho hloekisa
Ho netefatsa tshebetso e ntlafetseng, ho bohlokwa ho boloka sebaka sa ho nyalana ha mohlahare se hlwekile ka dinako tsohle.
Ho hloleha ho etsa joalo ho ka baka phoso ho bala. Ho hloekisa mehlahare ea probe: Sebelisa sand paper e ntle haholo (hantle 600) ho qoba ho phunya mohlahare, ebe u hloekisa ka bonolo ka lesela le tlotsitsoeng ka oli.
TS'OATSO E TS'OA
O tlameha ho iteanya le Setsi sa rona sa Tshebeletso bakeng sa nomoro ya Tumello ya Tshebeletso ya Bareki (CSA#). Sena se tla etsa bonnete ba hore ha sesebelisoa sa hau se fihla, se tla lateloa le ho sebetsoa hang-hang. Ka kopo, ngola CSA# ka ntle ho sejana sa thepa
Chauvin Arnoux®, Inc. dba AEMC® Lisebelisoa
15 Faraday Drive . Dover, NH 03820 USA
800-945-2362 (Ext. 360) • 603-749-6434 (Ext. 360) • repair@aemc.com
(Kapa ikopanye le mophatlalatsi oa hau ea lumelletsoeng)
ELA HLOKO: Bareki bohle ba tlameha ho fumana CSA # pele ba khutlisa sesebelisoa leha e le sefe.
THUSO LE THEKISO
Haeba u na le mathata afe kapa afe a tekheniki, kapa u hloka thuso efe kapa efe ka tšebeliso e nepahetseng kapa ts'ebeliso ea sesebelisoa sena, ka kopo ikopanye le mohala oa rona oa tekheniki: 800-343-1391 • 508-698-2115 • techsupport@aemc.com
TIISETSO MOEKETSI
Probe ea hajoale e netefalitsoe ho mong'a nako ea lilemo tse peli ho tloha ka letsatsi leo a rekileng ka lona khahlano le liphoso tse entsoeng. Tiisetso ena e lekanyelitsoeng e fanoa ke AEMC ® Instruments,
e seng ka moabi eo e rekiloeng ho eena. Tiisetso ena ha e na letho haeba yuniti e bile tampe entsoe, e hlekefelitsoe kapa haeba sekoli se amana le tšebeletso e sa etsoang ke AEMC ® Instruments.
Tšireletso e felletseng ea waranti le ngoliso ea sehlahisoa e fumaneha ho rona websebaka ho: www.aemc.com/warranty.html.
Ka kopo, hatisa Boitsebiso ba Tšireletso ea Tiisetso ea Marang-rang bakeng sa lirekoto tsa hau.
Litokomane / Lisebelisoa
 |
Lisebelisoa tsa AEMC MN252 AC Hona Joale Probe [pdf] Bukana ea Mosebelisi MN252, MN253, MN252 AC Current Probe, AC Current Probe, Current Probe, Probe |
